Mandrake & ADSL

Mandrake & ADSL

Post by Peppino - B » Mon, 13 Sep 2004 07:13:12



Ho tentato pi volte di installare ADSL  su linux  Mandrake
vers. 9.2 & 10.0 , niente da fare !!
 Qualche suggerimento ?
___________________________________________

I attmpted severeal time to  configure ADSL  on Linux Mandrake
vers.  9.2 &  10.0  , with no result !!
 Any suggestion on the matter ?

Pepynet - Bologna  Italy

 
 
 

Mandrake & ADSL

Post by Clive Dov » Mon, 13 Sep 2004 23:53:29



> Ho tentato pi volte di installare ADSL  su linux  Mandrake
> vers. 9.2 & 10.0 , niente da fare !!
>  Qualche suggerimento ?
> ___________________________________________

> I attmpted severeal time to  configure ADSL  on Linux Mandrake
> vers.  9.2 &  10.0  , with no result !!
>  Any suggestion on the matter ?

> Pepynet - Bologna  Italy

Please advise the make and model of your dsl modem and whether it has a
built-in router or whether there is a separate router between the modem
and the computer and if so, the make and model of the router.

The set-up is different depending on whether you are using a usb
connection or an ethernet card and whether or not there is a router in
the hardware connection.

Clive

Clive

 
 
 

Mandrake & ADSL

Post by Bill Unr » Sun, 19 Sep 2004 07:41:35



]Ho tentato pi volte di installare ADSL  su linux  Mandrake
]vers. 9.2 & 10.0 , niente da fare !!
] Qualche suggerimento ?
]___________________________________________

]I attmpted severeal time to  configure ADSL  on Linux Mandrake
]vers.  9.2 &  10.0  , with no result !!
] Any suggestion on the matter ?

Mandrake or Linux has nothing to do with ADSL. It is the modem that does
that. It translates either from ethernet or USB to ADSL. (ethernet is far
far easier). Now many ADSL services ALSO use weird authentication
mechanisms and mechanisms to tell the service with provider to use. Three
are bridged, PPPoA and PPP0E (in order to reasonableness.) the first is if
there is only one provider, and is what is used in Canada (the telco is the
only ADSL ISP) the third is an * that should have been quietly
killed at birth, but wasn;t.

Most modems sold in the country have pppoa or pppoe already included in the
modem-- set up via a web page.

If it is an ethernet to adsl modem, you use dhcp to get the address for
your system from the modem, then use a browser to query the modem (using
the address supplied in the booklet that came with the modem) and setup on
the web page supplied. But you give us no information at all. For all we
know you forgot to buy an adsl modem. So more info is necessary.

 
 
 

1. ppp && PPPoE && ADSL && net && buffer(s)

Hello!
i have a freebsd box (4.8-RELEASE) and a italian ADSL (256/128 if i remember good) line.
sometimes my freebsd box (that i use as firewall in my little lan) became stalled.
no data arrive and with ping IP i get error about some buffers full.
in ppp.log i see a lot of:
Jun 24 22:45:39 firewall ppp[66]: tun0: Phase: Clearing choked output queue

i search with google on newsgroups but i don't find nothing that work :)

i put some info on the configuration, because i read a lot of question about this parameters :)

kernel config:
maxusers        64
options         NMBCLUSTERS=32768       #expand nic buffer

in ppp.conf:
add default HISADDR

netstat -m:
1/400/131072 mbufs in use (current/peak/max):
        1 mbufs allocated to data
0/182/32768 mbuf clusters in use (current/peak/max)
464 Kbytes allocated to network (0% of mb_map in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines

netstat -t:
Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            192.168.100.1      UGSc       15  8181837   tun0
localhost          localhost          UH         11   116358    lo0
192.168.0          link#1             UC          3        0    rl0
firewall           00:10:a7:06:7b:50  UHLW        3    31603    lo0
stefano            00:06:4f:01:08:86  UHLW       12 15328918    rl0    900
192.168.0.255      ff:ff:ff:ff:ff:ff  UHLWb       0     2635    rl0
192.168.100.1      hostXXX-172.pool62 UH         19        0   tun0

i hope that someone can help me :)

Regards,
        Stefano

--
Stefano Balocco
RIPE handle:    6BONE-SB27
Keyserver:      http://keyserver.linux.it ID:     8EF05AB2
Fingerprint:    DF65 A9E5 E307 D647 9E41 1CD1 9265 BF7D 8EF0 5AB2

2. partiton

3. Mandrake 7.1 & ADSL (rp-pppoe)

4. qt-3.1.1 make install fails after working compile.

5. mandrake 8.2 & dyndns.org & netopia dsl modem & linksys router

6. Sun RPC problem

7. ADSL, ssh & X (Was: ssh & X)

8. proftpd

9. &&&&----Looking for a unix shell------&&&&&

10. SpeedTouch USB ADSL modem and Mandrake 8.1 connected but not working

11. SOLUTION: got adsl-start, dsl working with Mandrake 9.1

12. Help: Mandrake 9.2- my eth1 won't talk to my ADSL modem

13. Globespan ADSL Modem - Mandrake