Board index Linux Networking

Driver for Winbond W89C840F pci 10/100 network adapter?

Driver for Winbond W89C840F pci 10/100 network adapter?

Post by Karlyn Fieldin » Tue, 02 Mar 1999 04:00:00



Does anyone know of a driver that has been written to support this type
of network adapter?  I got it really cheap at the local computer store
hoping to make it work.  After a bit of investigation on the chipset, it
seams that there is only a driver that has been written for FreeBSD 3.1.

If anyone has any information on a driver for this type of controller, I
would much appreciate it.

Manufacturer: Unicom Global Systems Solutions
Part Number: FEP-4206-EP  (Board REV A3)
Web Site: www.unicomlink.com
Controller Chip: Winbond W89C840F
Transceiver Chip: Davicom DM9101F


TIA,

Karlyn Fielding

 
 
 
Top

1. Device Drivers for Intel InBusiness 10/100 PCI Network Adapter

Can anyone tell me where I might find device drivers for these cards?
Running Linux-Mandrake 6.5.  New to this Linux stuff and am afraid I wasted
$100.00 on two cards that won't work under Linux.  Thanks in advance for
your help!!!

Dan

2. Some progress with wpa_supplicant/madwifi

3. Network adapter compatability HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter

4. USER variable

5. FS: 10/100 4 port switch and 4 10/100 Network Adapters

6. HELP on CDROM trouble

7. Drivers for OC-2325 Fast Ethernet PCI/II 10/100 Adapter

8. Compaq Presario video problem

9. Ethernetcard 10/100 PCI with Winbond W89C840 Chip

10. Driver HP 10/100 Network adapter

11. SOHOware Auto 10/100 PCI Fast Ethernet Adapter?

12. 3Com Fast EtherLink 10/100 MB BusMAster PCI Ethernet Adapter

13. Allied Telesyn AT2560TX 10/100 PCI Fast Ethernet Adapter Card


All times are UTC
Board index