question about 3c59x

question about 3c59x

Post by Bart Sikke » Mon, 24 Apr 2000 04:00:00


This are the settings in my "conf.modules" file:

alias eth0 3c59x
alias eth1 ne2k-pci
options eth0 options=0

Is this the good way to force my 3com 905B to 100Mbit ?

If it is why doesn't it work? (the leds on my card clearly show it
becomes 10 Mbit when the drivers are loaded, before that de 100Mbit led
is turned on)



1. Newbie Question : Insmod 3c59x.c failed?

Hi all,
  I am new to linux. I am trying to set up RedHat Linux ver 6.2
on my system but I cannot get my NIC to work.

  My NIC is 3Com 3C905-TX PCI and my linux version is 2.2.14-5.0.
During tyhe booting up procedure, I got the error message :

eth0: Insmod 3c59x.c failed.

* Sent from RemarQ The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

2. lp hangs (Word Perfect wpexc51 too)

3. Question on 3c59x driver copybreak

4. Silly Question about installing:-)

5. 3c59x driver with VLAN support -- kernel 2.6.x, vlan802.1q, driver 3c59x.c

6. 8mm Tapes on Linux

7. Dell, 3c59x, and RH 4.0 (was Re: Newbie : 3c59x and RH 3.03 *Nothing* works)

8. XF86Config works as root but not as user: Please help!

9. 3c59x.c 'debug' question

10. Driver for 3c59x card

11. 3c59x.c

12. 3c59x:command 0x3002 did not complete! Status=0xffff

13. 3c59x 3c90x and ker 2.4.0