Using Linksys Wireless USB in RH 8

Using Linksys Wireless USB in RH 8

Post by Andrew Yat » Sat, 14 Dec 2002 01:50:13



I have the Linksys Wireless USB Version 2.6, and a computer with Red
Hat 8 on it. I downloaded the drivers from
http://atmelwlandriver.sourceforge.net/ I compiled them and followed
all the instructions, but when I start RH up it says something like
"usbvnetr, no such device" and then something about delaying its start
up. (The internet won't work so I can't copy it, i'm using windows
now.) In my /etc/modules.conf I have eth0 (which is my wireless usb)
pointing to usbvnetr, I also tried usbvnet, usbvnet3, usbvnet5 and
vnetusba. None of them worked.
It *seems* like the drivers are correctly installed, but something
isn't set right so that it won't recognize eth0. When I type iwconfig
eth0 <any option> it says that eth0 does not exist.
Does anyone know how to fix this?
 
 
 

1. Linksys Wireless-B USB Network Adapter (FCCID: Q87-WUSB11-V28)

Just picked this up at Best Buy and came home to find out that there
is no information available, on the internet or from the manufacturer,
yet. I called Linksys tech support and was told that the product isn't
officially released until next week, so they have no info on it now
(i.e. chipset, radio...). I did find an FCC listing for this model:

https://gullfoss2.fcc.gov/prod/oet/cf/tcb/reports/Tcb731GrantForm.cfm...

Trying to get it to work with K6-450(i586) running Slackware 9.1-full
install, kernel 2.4.20...
I compiled the open source Atmel drivers v2.1.1 and insmod'ed all
three available

usbvnet5
usbvnet5_2958
usbvnetr

..unplugged/replugged the usb adapter. I can see in `dmesg` that the
device has vendor id 0x1915 and product id 0x2233

bash-2.05b# dmesg
---->
hub.c: new USB device 00:07.2-1, assigned address 5
usb.c: USB device 5 (vend/prod 0x1915/0x2233) is not claimed by any
active driver.
<----

...but no driver is picking up the device. I have two USB ports, one
device plugged in.

bash-2.05b# cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI-alt Root Hub
S:  SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=1915 ProdID=2233 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Same vendor id, same product id, looks like some information about the
power used.

How could I get chipset/radio data about this device to know which
driver I should be using???

2. Network Monitoring Utility

3. linksys wireless usb

4. anonymous ftp shows incorrect time in logfiles

5. How to configure Linux and Linksys USB Wireless adapter?

6. Problem with "Blurred" fonts...

7. Linksys USB wireless adapter with Red Hat?

8. Win ME to Mandrake 8.1

9. Linksys Wireless USB Network Adapter WUSB11 v2.5 Linux Driver

10. 802.11b wireless USB (Linksys WUSB11) -- Help!

11. Linux drivers for LinkSys USB -to - wireless adapter

12. Linksys Wireless G Printserver for USB 2.0 wps54gu2

13. HELP! Conifguring Linksys Wireless Adapter on RH 7.3