Linux supported PRI ISDN cards??

Linux supported PRI ISDN cards??

Post by Rick Savo » Wed, 28 Jun 1995 04:00:00

Does anyone know of any Linux supported Primary Rate ISDN cards?  
I'm trying to get an application going that will use the ISDN card
to route PPP packets.  I need the PRI support to generate a large number
of calls.  

If anyone has ANY leads, I'd greatly appreciate it.



Linux supported PRI ISDN cards??

Post by Bryan Lev » Thu, 29 Jun 1995 04:00:00

Have you contacted CombiNet (sunnyvale, calif - 408 area code) ?

They are a premier maker of isdn products (cards, routers, etc).


web: <a href=""> Bryan Levin </a>

        "nuthin' left to do but compile, compile, compile" ;-)


1. PPP to Cicso CHAP ISDN PRI Card

  Hello all,

  I have been bashing my head in trying to have my RedHat 5.2 box connect
via PPP to a Cisco ISDN PRI (7813 I believe) using CHAP.  I have set entries
in the pap-secrets file and chap-secrets files as per instruction.  The only
thing that I have not done is to supply addresses in these files.

  Now the problem is that when I dial via my Motorola Bitsurfer Pro, I
connect and the remote side sends me what I think is the first step in
authoriztion (appears as consistant lines of garbage in the
/var/log/messages file).  The remote side sends me these lines every 3 or 4
seconds but my Linux box does not seem to ever respond (based on my logs and
no activity on the TA's transmit data LED).  The remote side may send me 10
attempts but my side does not ever send a thing and I get the pppd script
failed message.  I used the RedHat network config tool to configure this and
call 'ifup ppp0' to initiate a connection.

  When I attempt to place the line 'auth' in my options file I receive an
error such as authentication required but no suitable secrets found.  Since
CHAP must be used and placed entries in the files why are my entries not
being found?  Am I perhaps missing something in my options file? I tried
using the 'name' and 'user' lines in my options file but still no-go.

   Any ideas? Please........ I have a feeling I have missed one silly
parameter in this case. Never fails.....

         Thank You in advance

         George Minich

2. Linux Hang on install

3. PRI-ISA T1 ISDN card by NETACC, Driver needed.

4. Perl 4.036 compiles on Solaris; TEST has problems

5. HELP NEEDED: Linux ISDN PRI driver

6. vi problem

7. PRI Card for Linux Required with PBX Software .....

8. My setup

9. DIVA isdn PRI adapter driver needed.

10. BSDI/FreeBSD as ISDN Access Server using RISCom/Pri

11. Internet provider with ISDN PRI => howto ?

12. pri rate isdn interfaces

13. Linux support for Eicon Diva 2.0 Pro ISDN card?