Hallo Group Readers.
I run linux on my desktop. It also serves as NAT. I also have spare
USB wifi adapter I would like to use to change my linux desktop into
wifi wpa2 accesspoint.
is it possible on linux?
> is it possible on linux?
Hi I have problem with wrt54gl v1.1, ddwrt v24 mini +freeradius (2.0.5)
+ wirelesscard wpc54g v3.1 with wxp with patch to use wpa/wpa2
I think that authentication in my radius pass correct but there is some
problem with wpa mode or wpa compatibility
In my ddwrt I try mode: wpa-enterprise, wpa2-enterprise, wpa2
enterpise-mix and radius. In my wirless card a try: wpa and wpa2
below my freeradius.conf:
andy Auth-Type := Accept, User-Password == "andy"
and log from radius:
rad_check_password: Auth-Type = Accept, accepting the user Login OK:
[andy] (from client wrt54g port 0 cli 00-18-F8-aa-aa-aa)
Sending Access-Accept of id 4 to 10.0.0.6 port 1026
my wrt54g still send to syslog:
and i never connect to network and i must still (every 30s) type login
and password to authenticate When i use only wep, without radius,it's works.
I use all may ports 4xLan+1XWan in vlan0 as the switchport.
I try setup radius+wep/wpa in wrv200 but the problem is the same
I have dwl900ap+ from dlink and when I use radius + wep 64bit everything
i don't have any idea
thanks for any help