Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters

Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters

Post by Justinie » Mon, 15 Apr 2002 00:02:30



Hi

I am trying to insert a module in my kernel 2.4.18 and I get the following
error.


fealnx.o : init_module: No such device
fealnx.o : Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.

but when I do "lspci" I get the following result, so it seems my network
card is correctly installed.
00:00.0 Host bridge: Intel Corporation 430HX - 82439HX TXC [Triton II] (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
(rev 01)
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II]
00:0d.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326
(rev 0b)
00:10.0 Ethernet controller: MYSON Technology Inc: Unknown device 0803

Help would be appreciated ...

Thanks
Justinien.

 
 
 

Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters

Post by nick » Mon, 15 Apr 2002 05:20:48


Quote:> 00:10.0 Ethernet controller: MYSON Technology Inc: Unknown device 0803

PNP can detect the device type and vendor, but "Unknown device..."
cleary shows that the driver is NOT installed.
-nick

 
 
 

1. invalid parameter io

Iam trying to get a 3c509 ethernet card to come up on a asus motherboard

I can configure it manually as follows:

modprobe 3c509
modprobe 3c509 io=0x300 irq=5
ifcofnig eth0 192.168.1,1 netmask 255.255.255.0 broadcast 192.168.1.255

this works when done manually

when I try to configure through linuxconfig I get invalid parameter io from
3c509.o

any ideas?

2. MS Flame Fest

3. New: bug in module parameters causes an oops

4. Boca Stuff

5. KiKbd: X11 error: BadWindow (invalid window parameter)

6. help, can't install linux on laptop

7. Solaris 2.3 Network Printer Setup

8. X Error of failed request: BadWindow (invalid Window parameter)

9. X Error (invalid parameter attributes) on application startup

10. diald, chat log error 'Can't get terminal parameters: Invalid argument'

11. KiKbd: X11 error: BadWindow (invalid window parameter)

12. X Error of failed request: BadWindow (invalid Window parameter)