Very Computer

I was trying to setup some policy routing on my Linux by using "ip
rule", i am wondering if there is a way to debug the Routing Policy
Database (RPDB) ?, For example some counter or logs to show  which
rule was matched?

Regards
Treker

Quote:> Hi all

> I was trying to setup some policy routing on my Linux by using "ip
> rule", i am wondering if there is a way to debug the Routing Policy
> Database (RPDB) ?, For example some counter or logs to show  which
> rule was matched?

> Regards
> Treker

route -Ceen

Thanks for the help, it's not exactly what i want, but i think it help
a little bit.

For example. if there is a way can make the output of "ip rule" as the
following thing.

XXX YYY 0:      from all lookup local
XXX YYY 32764:  from all to 5.6.7.8 lookup 1
XXX YYY 32765:  from all to 1.2.3.4 lookup 1
XXX YYY 32766:  from all lookup main
XXX YYY 32767:  from all lookup default

where XXX maybe is the packet count, YYY is the byte counts of that
rule.
like what we have in iptables
============================================================
Chain POSTROUTING (policy ACCEPT 2367 packets, 273K bytes)
 pkts bytes target     prot opt in     out     source
destination
    0     0 MASQUERADE  all  --  *      tun0    192.168.1.0/24
0.0.0.0/0
    6   300 MASQUERADE  all  --  *      ppp0    192.168.1.0/24
0.0.0.0/0
============================================================

then you may easily know which rule come wrong. comments?

Treker