Board index Linux Networking

pppserver and routing

pppserver and routing

Post by cande jerom » Thu, 30 Jan 1997 04:00:00



I have a local network at 192.192.192.0
I want one of these computers to be a pppserver.
This one is compiled with IP Forwardind.
The modem is an external modem (Sportster US Robotics).
The IP adress of this computer is 192.192.192.1

When I conncet the server with a client, pppd run correctly, the routing
table is made.
When I pinged the ppserver from the client, no problem, but I can't
reach no other computer on the local net.

I tried many options like:
exec pppd -detach modem crtscts proxyarp lock $LOCIP:$RMTIP
Nothing more.
The $LOCIP must be 192.192.192.1 in this example ?
Should I try with another address for the pppnet ?

Could someone send me a routing table with a brief description of his
network ?

Thanks a lot !!!

Sorry for my poor english !!

 
 
 
Top

pppserver and routing

Post by B.A.McCau.. » Fri, 31 Jan 1997 04:00:00



>I have a local network at 192.192.192.0
>I want one of these computers to be a pppserver.
>This one is compiled with IP Forwardind.
>The modem is an external modem (Sportster US Robotics).
>The IP adress of this computer is 192.192.192.1

>When I conncet the server with a client, pppd run correctly, the routing
>table is made.
>When I pinged the ppserver from the client, no problem, but I can't
>reach no other computer on the local net.

>I tried many options like:
>exec pppd -detach modem crtscts proxyarp lock $LOCIP:$RMTIP
>Nothing more.
>The $LOCIP must be 192.192.192.1 in this example ?

Actually you neededn't give it.  pppd will assume 192.192.192.1

Is $RMTIP 192.192.192.x ?  If not you can't use proxyarp.

Quote:>Could someone send me a routing table with a brief description of his
>network ?

It would make more sense for you to send yours!

--

 .  _\\__[oo       from       | Phones: +44 121 471 3789 (home)

.  l___\\    /~~) /~~[  /   [ | PGP-fp: D7 03 2A 4B D8 3A 05 37...
 # ll  l\\  ~~~~ ~   ~ ~    ~ | http://wcl-l.bham.ac.uk/~bam/


 
 
 
Top

1. Routing [Win95]--serial--[Linux]--modem--[PPPserver]

I really like to have help or comments about this config that i'm trying to install:

I have at home 2 PC, one with Win95 and one with Linux.
and I want to connect them together using serial cable (null-modem).

and then with the Linux machine using a 28.8 modem to connect to school, running SLIRP.

then:

[win95]-- serial --[Linux box]-- modem --[slirp/PPP at school directly on Inet]

my question is 1) how can I set Win95 (dialup Networking and PPP connection client)

2) how can I set Linux (running PPPD for win95 connection, and another PPPD for the modem connection and using 10.0.2.15 for slirp)

3) how can I re-route all the IP from win95 to linux..

I don't need that people on Inet see my linux or win95 box (slirp prob), I just hope that I can use Netscape, telnet from win95, ftp directly on the Net without using IP. == I need transparency from my win95.

I'm waiting for you comments, thanks in advance.
Duc

2. AWK, command line params (Q)

3. Matrox Mystique ands X.

4. Backup of system

5. minimum 2x ISDN pppserver?

6. How to FTP PUT a whole directory?

7. Linux PPPserver:Macintosh OK, Wintel No way

8. Employment

9. Linux as pppserver for Win95 boxes?

10. help pppserver

11. I want to be a PPPserver !

12. route problem: route forgot to specify route netmask.


All times are UTC
Board index