problem with eth0 interface

problem with eth0 interface

Post by Chirag Sha » Mon, 18 Mar 2002 14:39:03



i have D-Link NIC on my linux machine, but when i boot, or try to configure
eth0 interface on it, it gives error: 'etho initialization delayed' and then
shows 'Failed'. can anyone please help me?

chirag

 
 
 

problem with eth0 interface

Post by peter pils » Mon, 18 Mar 2002 18:22:20



> i have D-Link NIC on my linux machine, but when i boot, or try to
> configure eth0 interface on it, it gives error: 'etho initialization
> delayed' and then shows 'Failed'. can anyone please help me?

do you get any additional info in your /var/log/messages ?
is it a laptop with the card handled by cardmgr ?
do you have the same problem with a different networkcard ?

peter

--
peter pilsl

http://www.goldfisch.at

 
 
 

problem with eth0 interface

Post by David Efflan » Mon, 18 Mar 2002 21:00:53



> i have D-Link NIC on my linux machine, but when i boot, or try to configure
> eth0 interface on it, it gives error: 'etho initialization delayed' and then
> shows 'Failed'. can anyone please help me?

Which D-Link card?  Different models use different modules and may even be
different if there is a "+" (plus) at the end of the model number.

--
David Efflandt - All spam ignored
http://www.autox.chicago.il.us/  http://www.berniesfloral.net/
http://www.nsscc.com/ - free driver school Friday nights in March

 
 
 

1. problem loading eth0 interface...

my lan topology is set up like this:

                                          _[linux ftp server]
                                         /
[cable modem]---[switch]-|
                                         \_[gateway router]
                                                   |
                                                   |-[host1]
                                                   |-[host2]
                                                   |-[host3]

The ftp server used to be behind the router, but since it has a built in
firewall, external connections wouldn't go through.  So i just bought a
switch and hooked everything up like the diagram above.  Now I am having an
access problem.  If the switch is turned on with everything plugged in,
everything under the router can get internet access but the ftp server
can't, the 'eth0' interface cannot even be loaded.  If the switch is turned
on without the router plugged in, the ftp server can gain internet access,
but if i plug in the router and turn it on, the hosts below the router
cannot gain access to the internet.  If I plug a windows pc into the switch,
and turn it on then everything works except the ftp server.  Is there some
sort of setting I need to change or does that topology just not work with
linux for some reason?

2. Linux Users Group in Baltimore?

3. ppp problem when eth0 interface is active

4. Programs start slow

5. eth0 and eth1 interfaces using eth0 NIC

6. X problems after upgrade to 2.2.5

7. Bridge-nf problem with "iptables FORWARDING --in-interface eth0"

8. TRIDENT GUI 9440 AGi & Slack96..desperate!!!

9. Shutting Down Interface Eth0 Problem

10. eth0: error fetching interface

11. eth0 interface

12. Interface eth0 is permanently down (RedHat6.0)

13. ifconfig -- "eth0: interface unknown"