Micom Interlan Terminal Server needs reset.

Micom Interlan Terminal Server needs reset.

Post by Ian Cla » Sun, 07 Sep 1997 04:00:00



Hello all,
        I have aquired a Micom Interlan Remote Terminal Server.
Unfortunately at the moment the admin command is locked to me and I am
unable to reconfigue it to my network. I have tried various combinations
of buttons, commands and jumpers to remove the password but to no avail.
Does anyone out there know how to reset the password and what any default
password is.

The unit in question is an 8 port NTS possibly a model NTS 100.
A cartridge fits in the front and is marked:

INTERLAN
  nts
FEATUREPAK
Model No.       NTS/TCP-FP V3.1
Part No.        625-1036-06
Serial No.      928I0199/REV.CB

                                tia
                                        Ian

--

 
 
 

1. Ethernet card Micom Interlan NI5210 supported?

Is the Micom Interlan NI5210 ethernet card supported under linux yet?
I have used it succsessfully under DOS/Win31 with NCSA telnet 2.2d,
where it does not require external packet drivers.


|  TU Berlin, FR 3-9, Franklinstr. 29, W-1000 Berlin 10  |
|  Phone: (+49) 30 314-73432    Fax: (+49) 30 314-21103  |
--

|  TU Berlin, FR 3-9, Franklinstr. 29, W-1000 Berlin 10  |
|  Phone: (+49) 30 314-73432    Fax: (+49) 30 314-21103  |

2. xbiff and pop3

3. Linux + MICOM Interlan NI5210A-8 = success?

4. Motif and forms

5. Summary: Do Micom/Interlan cards wo

6. Bitsurfr <==> Livingston Office Router HELP!

7. MICOM NTS10 Terminal Servers with Linux?

8. Unable to upgrade to Solaris

9. Reset terminal to login when I power cycle the terminal?

10. Need Getty to work with MICOM under ULTRIX

11. 1 * IKxAGqUdE-Advise/Recommendations needed for Network Terminal Server

12. Terminal server software? communications help needed..?

13. Need recommendations on terminal servers