Network Cards

Network Cards

Post by Brian Scott Corbi » Sat, 14 Mar 1998 04:00:00



I'm currently running Linux 2.0.0 and wish to setup a small network.
I'm new to networking and would like some input on which network cards
are best for use with Linux.  (IE: Easy Setup...)

Any feedback would be appreciated.

--Brian Corbin

 
 
 

Network Cards

Post by GD » Sun, 15 Mar 1998 04:00:00



> I'm currently running Linux 2.0.0 and wish to setup a small network.
> I'm new to networking and would like some input on which network cards
> are best for use with Linux.  (IE: Easy Setup...)

> Any feedback would be appreciated.

> --Brian Corbin

 Well since you did not indicate whether you need one for a laptop or
desktop...I use the 3com 3C589D pcmcia cardfor ether and have had no
problems, you can also pick them fairly cheap. If you are going to use
token ring make sure you have one that is true IBM, I belive it has to
have the tropic chip.

Good Luck

--
#--------------------------
Garret Davis (www.geocities.com/SiliconValley/Lab/6185)

#--------------------------

 
 
 

Network Cards

Post by Simon Broo » Sun, 15 Mar 1998 04:00:00




Quote:> I'm currently running Linux 2.0.0 and wish to setup a small network.
> I'm new to networking and would like some input on which network cards
> are best for use with Linux.  (IE: Easy Setup...)

> Any feedback would be appreciated.

Real NE2000 cards can be a pig to set up with Linux, but I have for
years used D-Link DE220s (good quality NE2000 clones) in Linux boxes
using NE2000 drivers and they've been a breeze to set up and problem-
free in use. I must have installed twenty of them by now. Don't know
about the latest 'Plug'n'play' ones, though -- generally I'm
suspicious of anything that calls itself plug and play.

3COM cards also seem to be well liked.

--

                        Unite in Armed Snuggle!

 
 
 

Network Cards

Post by A » Mon, 16 Mar 1998 04:00:00


On Fri, 13 Mar 1998 13:15:55 -1300, Brian Scott Corbin


>I'm currently running Linux 2.0.0 and wish to setup a small network.
>I'm new to networking and would like some input on which network cards
>are best for use with Linux.  (IE: Easy Setup...)

>Any feedback would be appreciated.

>--Brian Corbin

http://www.cc.gatech.edu/LDP/HOWTO/Hardware-HOWTO.html

also check donald becker's excellent page for linux network drivers
(you can often find the bleeding edge stuff here)

http://cesdis.gsfc.nasa.gov/linux/drivers/

--Anindya


s/NOSPAM// the above to e-mail me direct.

 
 
 

1. 3C905 Network Card detected as a Vortex Network Card (3c59X series)

    I have a problem in connecting my Linux Server. I already had a
linux server working and
was planning to add a newer machine to replace it. In the new machine, I
had a 3c905
network card (Boomerang Series) but RedHat detects it as a Vortex Series
Network card
(3c59x). I continued on with the installation and  connected the 2 Linux
machines in a hub.
However, when I tried to check the connection using the ping command,
time-out error
occurred. Is it because of wrong detection of network or something else?
Any help would be
greatly appreciated.

Thanks

PS. Please reply to my e-mail address if possible. I might not be able
to get the answer on
time if posted in the Usenet.

2. rshd fails

3. testing network card without being connected to a network?

4. cacheability of motherboard

5. Network error or Network card error?

6. using chmod -R on directories only

7. A Linux in Two Networks Throug the same Network Card?, HOW TO CONNECT

8. PPP config for Sprynet/Compuserve

9. 3Com network card cannot see network

10. 2 network cards, different networks

11. two network cards, two(?) networks, one computer...

12. Networking without network card

13. Network install of RedHat 6.1 with a PCMCIA Network Card?