mrtg/snmp problem

mrtg/snmp problem

Post by mdew » Sat, 24 Aug 2002 17:23:55





no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457542
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 456
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on

 at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache


not seem to support it --snpo: Skipping ipAdEntIfIndex scanning because



support it --base: Get Interface Info --base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457536
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569

 at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457535
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569

 at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457534
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569

 at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457533
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569

 at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.6" [10.0.0.6].161)
                  community: "c1sc0"
                 request ID: -1225457532
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569

 at /usr/bin/cfgmaker line 107

debian:~# ps aux | grep snmp
root     16061  0.0  4.6  4916 2712 pts/1    S    07:35   0:00
/usr/sbin/snmpd -s -l /dev/null -P /var/run/snmpd.pid

--
ph33r!
Linux mdew 2.4.19-xfs-rmap13c-preemptive #2 Sat Aug 10 02:18:14 NZST 2002
i686 unknown unknown GNU/Linux
GPG Key: http://mdew.orcon.net.nz/gpg

 
 
 

mrtg/snmp problem

Post by Andrei Ivan » Sun, 25 Aug 2002 05:13:29





> no response received
>  [...]
> debian:~# ps aux | grep snmp
> root     16061  0.0  4.6  4916 2712 pts/1    S    07:35   0:00
> /usr/sbin/snmpd -s -l /dev/null -P /var/run/snmpd.pid

You need to allow SNMP requests from this particular IP address using
this particular community string by editing /etc/snmp/snmpd.conf file
(and then restarting snmpd process, or SIGHUPing it).

--
andrei

 
 
 

1. MRTG installation problem (SNMP Error) Help

Dear All,

I got a copy of MRTG 2.8.8 at
http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html and try to install
it to my Solaris 7 x86. but when i create the mrtg.cfg by using


it return te following messages:

SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 36634948
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber

SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 517944879
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 517944880
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
#

I have the Solstice Enterprise Agents 1.03 installed on the server. Someone
told me that it provide the SNMP for MRTG. I'm using the Cisco 2610 router.
Can anyone help me to install the MRTG? 1,000,000 Thanks

Regards,

Chris

2. cal SERIOUS problem

3. SNMP on 2.2.2-Release for Network Traffic with MRTG.

4. Shared Library (plugins) in kdevelop/anjuta

5. MRTG SNMP MIB Temperature

6. The Sed Editor, a Question

7. Linux 2.2.1 : bogus high traffic with snmp/mrtg

8. Nasty 2.2.2 FreeBSD bug

9. Net snmp + mrtg

10. mrtg/ucd-snmp and Linux

11. ucd-snmp & mrtg

12. MRTG && NET-SNMP

13. SNMP & MRTG