usb 3Com ethernet adapter and samba

usb 3Com ethernet adapter and samba

Post by Thomas Hohenberg » Sat, 17 Nov 2001 19:50:13



i've got right now with SuSE Linux 7.3 my 3com usb ethernet adapter
running. The problem is that samba isn't able to start the nmbd
service?????????
I've tried as well an http connection on port 901 which didn't worked
as well.... any suggestions???????????????
 
 
 

usb 3Com ethernet adapter and samba

Post by ozus » Sun, 18 Nov 2001 04:21:25


as of the problem you cannot access localhosts:901 maybe u didn't install
swat
if you do install it make sure it's running. try to look at your netstat -an

about you can't execute nmbd i don't know

cheers


Quote:> i've got right now with SuSE Linux 7.3 my 3com usb ethernet adapter
> running. The problem is that samba isn't able to start the nmbd
> service?????????
> I've tried as well an http connection on port 901 which didn't worked
> as well.... any suggestions???????????????


 
 
 

1. Ethernet to USB gateway? (not USB to Ethernet)

Hello Readers,

There are many Ethernet adapters for the USB on the marktet. But I am
looking for an Ethernet to USB gateway - I haven`t found one yet.

I have an embedded PC with ethernet (10 MBit/s) and want to connect USB
devices to it. Is there any solution?

I know, that there are printer servers with USB available now, but could
they be used to connect other USB devices, too?

Maybe somebody can help...

Greetings
Ernst

2. Does linux run on Sager NP700 systems?

3. 3Com Fast EtherLink 10/100 MB BusMAster PCI Ethernet Adapter

4. PPPd Lock-ups...Uuug!

5. 3Com 905-TX PCI ethernet adapter

6. CMC terminal servers.

7. 3COM 3C509 Ethernet adapter support?

8. Linux UUCP HOWTO (part 1/1)

9. 3Com Ethernet Adapter on AIX

10. 3Com Etherlink III Busmaster Ethernet Adapter

11. Q: Are 3COM 3C90x Ethernet adapters supported?

12. 3Com Ethernet adapter works, then doesn't work

13. Help: Unknown 3Com PCI ethernet adapter type 0000 detected: not configured.