Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Post by rnewsreade » Fri, 21 Jan 2000 04:00:00



Hi,

I installed RedHat 6.1 on my PC(dual boot 98/Linux). Everything is fine
exception the RedHat can't recognize my ethernet card( Intel
EtherExpress ISA Pro 10/10+). The card works fine in 98.

During the installation, RedHat couldn't detect my card at all. So I
tried to load it manually. I tried two ways:
1. I put ether=5,0x210,0,0,eth0 ( the conf in my 98) in lilo.conf, then
reboot the machine. During the boot, lilo couldn't start eth0.
2. I run lsmod, I found nothing there. I do have
/lib/modules/2.2.12-20/net/eexpro.o file, so I said insmod eexpro. The
linux hangs forever. I have to power off the machine.

What did I do wrong? Please help!

Regards,
Michael

* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

 
 
 

Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Post by rnewsreade » Fri, 21 Jan 2000 04:00:00


I have done what you suggested. That is how I set up my 98 but the same
setup (irq,io) won't work in redHat.

Any ideas?

Best Regards,
Michael


> go to intel's web page and get
> "softset" a dos utility to set i/o and irq for the net card,
> ( you need to boot your box in dos )
> then enter those settings when you boot in linux,
> regards,
> Larry D.


> >Hi,

> >I installed RedHat 6.1 on my PC(dual boot 98/Linux). Everything
> is fine
> >exception the RedHat can't recognize my ethernet card( Intel
> >EtherExpress ISA Pro 10/10+). The card works fine in 98.

> >During the installation, RedHat couldn't detect my card at all.
> So I
> >tried to load it manually. I tried two ways:
> >1. I put ether=5,0x210,0,0,eth0 ( the conf in my 98) in
> lilo.conf, then
> >reboot the machine. During the boot, lilo couldn't start eth0.
> >2. I run lsmod, I found nothing there. I do have
> >/lib/modules/2.2.12-20/net/eexpro.o file, so I said insmod
> eexpro. The
> >linux hangs forever. I have to power off the machine.

> >What did I do wrong? Please help!

> >Regards,
> >Michael

> >* Sent from RemarQ http://www.remarq.com The Internet's
> Discussion Network
> *
> >The fastest and easiest way to search and participate in Usenet -
> Free!

* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

 
 
 

Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Post by Data Network Design » Sat, 22 Jan 2000 04:00:00


go to intel's web page and get
"softset" a dos utility to set i/o and irq for the net card,
( you need to boot your box in dos )
then enter those settings when you boot in linux,
regards,
Larry D.


Quote:>Hi,

>I installed RedHat 6.1 on my PC(dual boot 98/Linux). Everything is fine
>exception the RedHat can't recognize my ethernet card( Intel
>EtherExpress ISA Pro 10/10+). The card works fine in 98.

>During the installation, RedHat couldn't detect my card at all. So I
>tried to load it manually. I tried two ways:
>1. I put ether=5,0x210,0,0,eth0 ( the conf in my 98) in lilo.conf, then
>reboot the machine. During the boot, lilo couldn't start eth0.
>2. I run lsmod, I found nothing there. I do have
>/lib/modules/2.2.12-20/net/eexpro.o file, so I said insmod eexpro. The
>linux hangs forever. I have to power off the machine.

>What did I do wrong? Please help!

>Regards,
>Michael

>* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network
*
>The fastest and easiest way to search and participate in Usenet - Free!

 
 
 

1. Intel EtherExpress Pro/10+ ISA and Redhat 5.2

I have tried and tried and tried to get this network card to work under
redhat.  I have tried working with network configuration utilities that
come with redhat.  I have recompiled the kernel.  I have made eepro.o a
module and put it in the kernel.  I have turned off the PnP and Flash
RAM memory on the card.  Most of the time, I get no message at all at
boot time.  However, the best I can do is get a message that says
"Delaying eth0 initialization."  Then, it's still useless.  Does anyone
have this card and has set it up successfully?  Any help would be
greatly appreciated.  

Wayne Eaker

2. Guikachu 0.13 "FuriGUI": GNOME Resource editor for PalmOS projects

3. Three Network-Cards INTEL ETHEREXPRESS PRO/10 ISA

4. g++ 2.7.0 & ELF problems

5. Intel EtherExpress PRO/10+ ISA card

6. Which is the best tool to search for music in MP3 format?

7. Linux Red Hat 5.0 Problems with Intel EtherExpress pro 10+ ISA NIC card

8. How to show ftp message to every user.

9. Installing Intel Etherexpress Pro 10 ISA with RH 6.0

10. HELP - Undetected Intel EtherExpress PRO/10 (ISA) on PCI machine

11. RedHat 5.1: EtherExpress Pro 10+ ISA card: HW address not recognizable by Linux

12. RedHat 6.0 & Intel EtherExpress Pro+ 10/100+Management PCI Ethernet Card

13. Intel EtherExpress Pro/10 card... supported in RedHat Linux 6.0?