by Alexander Smondyre » Thu, 07 May 1998 04:00:00
I am trying to get my 3c900 card work properly. I got an updated
driver 3c59x.c and recompiled and reinstalled the modules. Then
during the boot I am getting a message "Checksum Error ..." on
3c59x driver. My card works but I can not get further than our
router. At the same time the card works fine under Win95, which
makes me think that I am doing something wrong with card drivers.
Any suggestions?
- Thanks.
1. Checksum problem: 2.4.19-pre3 w/ 3COM Card + Wrong card model
The error below comes from enabling ERPOM boot on the network card. When this
is disabled the Checksum error goes away.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:05.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xa400. Vers LK1.1.16
***INVALID CHECKSUM 002f*** <6>Linux agpgart interface v0.99 (c) Jeff
Hartmann
This model is the wrong detected card.
It should be the 3C980C-TXM 10/100
Shawn.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
2. C99 designated initializer for fs/hfs
3. HELP!!! 3Com 3c905 CHECKSUM error on boot
4. Apache 1.3.0 and CGI shell-init problems
5. 3Com 3c509 Ethernet Cards and Bad Checksums
7. 3Com 3c905 CHECKSUM error on boot
9. 115k serial card - checksum errors
10. 3com 905 : INVALID CHECKSUM
11. 3com PCMCIA Card (3com Fast Etherlink XL 3C575-TX)
12. RX errors with 3Com 3c905b-TX PCI card on RedHat6.0
13. Problems with 3COM card strange kernel errors