linux to windows95 connectivity

linux to windows95 connectivity

Post by srinivasa ra » Sun, 12 Mar 2000 04:00:00



i installed linux 5.22 on pentium iii. On the other side i have 30 systems
are working on windows-95 with nt. linux system and windows 95 systems are
not connecting through telnet. Even pinging also not working.

what i did till now :

1) installed linux 5.22 with ip address 192.168.1.30
2) all systems off except linux and one windows 95 system
3) windows 95 system ip address is 192.168.1.3

both systems are pinging itself with loopback and ip address
but both systems are not pinging for connecting telnet

i changed /etc/securitty file ,  i added a line ttyp0
Eventhough it is not working

my problem is  i want to connect 20 win-95 systems to one linux server
through telnet.

please help me

--
Posted via CNET Help.com
http://www.help.com/

 
 
 

linux to windows95 connectivity

Post by David . » Sun, 12 Mar 2000 04:00:00


Did you setup your /etc/hosts  file and your /etc/hosts.allow  and your
/etc/hosts.deny  file?
Also on the windoz box use the IP of the linux box for the gateway and
on the linux box use 0.0.0.0 as the gateway.

--
Due to extreme SPAM abuse! Remove z's and x's from above to reply.
Thnak the spammer's A..holes that they are. Still can't reach me?
Then your address range is already blocked due to previous spam.
Sorry!  I hate spam!!

 
 
 

linux to windows95 connectivity

Post by David Efflan » Sun, 12 Mar 2000 04:00:00



>Did you setup your /etc/hosts  file and your /etc/hosts.allow  and your
>/etc/hosts.deny  file?
>Also on the windoz box use the IP of the linux box for the gateway and
>on the linux box use 0.0.0.0 as the gateway.

Actually I could not get my LAN to work when RH plugged in a default route
to 0.0.0.0 and specifically had to remove that with 'route del default'.
Use -net routing instead if the system does not set that up automatically.
His Linux route -n should end up looking like this, so defaultroute option
can still be used for pppd or other internet connection:

Destination     Gateway         Genmask         Flags Metric Ref Use Iface
192.168.1.30    0.0.0.0         255.255.255.255 UH    0      0    0 eth0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0    0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0    0 lo

There should be names for all LAN IPs in /etc/hosts and can also be put in
\windows\hosts (hosts.sam is just an example) on Win boxes if there is no
local DNS.

Other boxes on the LAN should be set to 192.168.1.30 as their default
gateway.

--

http://www.autox.chicago.il.us/  http://www.berniesfloral.net/
http://hammer.prohosting.com/~cgi-wiz/  http://cgi-help.virtualave.net/