encore ne2k clone stoped working.

encore ne2k clone stoped working.

Post by Rim Vilgaly » Sun, 26 Dec 1999 04:00:00

i have a encore ne2000 clone that worked great under redhat 5.1 (kernel
2.0.34).  however, since i have installed redhat 6.1 (kernel 2.2.12), the
driver will not compile (the driver is "fet916" and i have only seen it on a
disk that came with the card).  is there an updated driver somewhere?  ne.o
doesent want to work.

the card is an encore esl-816v-t

------------------  Posted via CNET Linux Help  ------------------


1. YDL-BIOS not enabling ne2k clone ethernet card

I have done a lot of research on this ethernet question. my card is a
MacAlly card with a RealTek 8029 chip -- a NE2000 clone, as I discovered
from D. Becker's ethernet driver site. I have used modprobe to load the
ne2k-pci module, using the i/o and irq settings I found in the /proc/pci
file. In fact, I have done this many times, and each time the eth0
interface fails to initialize at boot. The last time I tried this, the
dmesg file had the following text at the very end:

cat uses obsolete /proc/pci interface
ne2k-pci.c: v.1.02 for Linux 2.2, 10/19/2000, D. Becker/P. Gortmaker,

The PCI BIOS has not enabled this NE2K clone! Updating PCI command
ne2k-pci.c: PCI NE2000 clone 'Realtek RTL-8029 at I/O 0x400, IRQ23.
eth0: Realtek RTL-8029 found at 0x400, IRQ23, 00:00:1C:10:67:C4.\


Could someone help me interpret what this means? If the card needs to be
enabled, how do I do that?

(The last time I checked  lsmod, the ne2k-pci module was not loaded. I
suppose this is because the card was not enabled at startup.)

Is there something else I need to do or check?

Thank you.

P.S. my computer specs are:
Model name: UMAX SuperMac C500
Processor info: PowerPC 603ev
Machine speed: 240 MHz
Built-in memory: 112 MB
Ethernet: 2 10BaseT PCI Ethernet Adapters

--Adrian Membrez

2. choosing window manager in XF 4.0

3. NE2K Clones

4. Java/Netscape 3.0 does nothing!

5. kernel panic with my NE2K pci clone

6. r00t advisory -- hp jetadmin vulnerability

7. NE2K clone setup - another problem

8. Red Hat 6.1 and the Vodoo2

9. Looking for info on these PCI ne2k clones


11. Anyone got an Encore ENL832-TX 10/100M Fast Ethernet Adapter to Work?

12. uugetty stoped working after new kernel 1.1.50 -> 1.1.54

13. help: make stoped working when installed new gcc