Sign Incompatible NIC?

Sign Incompatible NIC?

Post by Aaron Chernosk » Wed, 04 Oct 2000 04:00:00



What are some signs of an incompatable NIC?

Being more specific, I have been able to get my Linux box to recognize
the card (SMC 1600 ISA).  I can ping localhost, but nothing else.  Is
the card incompatible? or no? how would I verify so?

Aaron C

 
 
 

Sign Incompatible NIC?

Post by extern.patrick.them.. » Thu, 05 Oct 2000 14:08:34




Quote:> What are some signs of an incompatable NIC?

> Being more specific, I have been able to get my Linux box to recognize
> the card (SMC 1600 ISA).  I can ping localhost, but nothing else.  Is
> the card incompatible? or no? how would I verify so?

> Aaron C

what do you mean with incompatible?
if it is recognized at bootup
(you get a message with the irq, and the macadress),
it works under linux
(as do most nics,afaik).
if you cant ping anything but localhost,
see that your network is configured to work.
if you want help with that,
send more info:
-what does ifconfig -a tell you?
-whats the setup of your network (other machines, which adresses you
use)?
-netstat -n might help as well.

--
'...' said the joker to the thief
'there's too much confusion, i cant get no relief...
so let us not talk falsely now, the hour's getting late'
(robert zimmermann)

Sent via Deja.com http://www.deja.com/
Before you buy.

 
 
 

1. getting the pound sign and the at sign to appear

While running under X I seem undable to get the 'pound' sign or the 'at'
sign. Looking in my keymap files they appear to be there. I suspect it
is something to do with the term not recognising these characters. As far
as I can make out it is only these characters that are effected. I could

command. Any ideas?

Please reply in email
thanks
Jonathan Booth


2. DOS boot disk

3. NIC / network won't load: Compaq Netelligent 10/100 Embedded NIC, Eth0

4. SURVEY: Xylogics (Bay Networks) erpcd

5. NIC NIC

6. 13W3 cable to 15Pin P200 monitor cable

7. Crossover Cable Needed for Direct NIC 2 NIC?

8. Hardware Recommendations

9. routing - 3comps - one dualport-nic & two "normal" nics

10. How to specify/detect an NIC when using two or more NIC

11. 4.2 nic aliasing, multiple IPs, one nic does not work???

12. unixware 7.1 doesn't have my NIC in the NIC list, how do I bypass

13. a couple of NICs that don't NIC