Puredata 10/100Base-TX Fast Ethernet Adapter

Puredata 10/100Base-TX Fast Ethernet Adapter

Post by Matthew H. Ra » Tue, 11 Apr 2000 04:00:00

I accidentally bought one of these thinking it was NE2000 compatible,
but I can't find a working module for it.  I've searched deja and
assorted Linux hardware pages and can't find any references to it.
Puredata isn't responding to email requests for information, and their
website is bereft of useful information.  Anyone have any good guesses
on which module to use?


(remove the hyphens for real address)


1. 3COM Fast Etherlink XL 10/100Base-TX (3c905B-TX)

Hi Everyone,

I have some trouble configuring a 3Com Fast Etherlink XL 10/100Base-TX with the
3c905B-TX with Linux. The driver recognizes it and configures it and eth0 is up
and running but nothing goes through to the network or comes out of it. Physical
connection is there, the lights are on. But not data gets transmitted or no data
comes throught it. 3c59x driver for linux identifies it correctly as 3c905B
"cyclone" and uses the io port 0x1000 and irq 10.

Did anyone come across this problem? If you have a solution can you please post it?
I would really appreciate that.

Thank you!

Sanjaya Wijeratne

   -**** Posted from Supernews, Discussions Start Here(tm) ****-
http://www.supernews.com/ - Host to the World's Discussions & Usenet

2. problems with rpc.mountd after network crash

3. 3Com Fast EtherLink XL 10/100BASE-TX Driver Needed

4. Linux Setup HELP

5. XFree3.1 patch for AL2101

6. Network adapter compatability HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter

7. g++ 3.0 cannot compile anything

8. 3com 3c574-TX 10/100BASE-TX

9. Anyone got an Encore ENL832-TX 10/100M Fast Ethernet Adapter to Work?

10. HP EN1207D-TX PCI 10/100 Fast Ethernet Adaptor

11. SMC9432TX Etherpower II 10/100 10BASE-T/100BASE-TX

12. Difference between 100Base-T and 100Base-TX