PPP Pb with windows95

PPP Pb with windows95

Post by Jean N Neveu » Tue, 03 Dec 1996 04:00:00



I use Linux 2.0.26 with pppd 2.2.0f and a US Robotic Sportster 28.8 on
the server side. My client is Windows95 with a generic 14.4.

After 1 or 2 minutes or less linux disconect me. I've played with the
mru and mtu, and it didn't resolve anything.

Here is my ppp-log:

Dec  2 03:14:46 antigone pppd[1458]: Connect: ppp0 <--> /dev/ttyS1
Dec  2 03:14:46 antigone pppd[1458]: sent [LCP ConfReq id=0x1 <mru 1500>
<asyncmap 0x0> <magic 0x49700e8d> <pcomp> <accomp>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [LCP ConfReq id=0x1 <asyncmap
0xa0000> <magic 0x23d2c> <pcomp> <accomp> < 0d 03 06>]
Dec  2 03:14:46 antigone pppd[1458]: sent [LCP ConfRej id=0x1 < 0d 03
06>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [LCP ConfAck id=0x1 <mru 1500>
<asyncmap 0x0> <magic 0x49700e8d> <pcomp> <accomp>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [LCP ConfReq id=0x2 <asyncmap
0xa0000> <magic 0x23d2c> <pcomp> <accomp>]
Dec  2 03:14:46 antigone pppd[1458]: sent [LCP ConfAck id=0x2 <asyncmap
0xa0000> <magic 0x23d2c> <pcomp> <accomp>]
Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfReq id=0x1 <addr
194.3.84.1> <compress VJ 0f 01>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [IPCP ConfReq id=0x1 <addr
0.0.0.0> < 81 06 c2 02 00 14> < 82 06 00 00 00 00> < 83 06 c2 02 00 32>
< 84 06 00 00 00 00>]
Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfRej id=0x1 < 81 06
c2 02 00 14> < 82 06 00 00 00 00> < 83 06 c2 02 00 32> < 84 06 00 00 00
00>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [IPCP ConfRej id=0x1 <compress
VJ 0f 01>]
Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfReq id=0x2 <addr
194.3.84.1>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [IPCP ConfReq id=0x2 <addr
0.0.0.0>]
Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfNak id=0x2 <addr
194.3.84.3>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [IPCP ConfAck id=0x2 <addr
194.3.84.1>]
Dec  2 03:14:46 antigone pppd[1458]: rcvd [IPCP ConfReq id=0x3 <addr
194.3.84.3>]
Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfAck id=0x3 <addr
194.3.84.3>]
Dec  2 03:14:46 antigone pppd[1458]: local  IP address 194.3.84.1
Dec  2 03:14:46 antigone pppd[1458]: remote IP address 194.3.84.3
Dec  2 03:14:46 antigone pppd[1458]: found interface eth0 for proxy arp
Dec  2 03:14:50 antigone inetd[98]: /usr/sbin/nmbd: exit status 0x1
Dec  2 03:15:05 antigone last message repeated 15 times
Dec  2 03:15:41 antigone pppd[1458]: Hangup (SIGHUP)
Dec  2 03:15:41 antigone pppd[1458]: Modem hangup
Dec  2 03:15:41 antigone pppd[1458]: Connection terminated.

These lignes are worrying me:
Dec  2 03:14:50 antigone inetd[98]: /usr/sbin/nmbd: exit status 0x1
Dec  2 03:15:05 antigone last message repeated 15 times

Would that come from a LCP config request problem?
Et que veux dire '/usr/sbin/nmbd: exit status 0x1'?

Thanks

Jean N. Neveux

 
 
 

PPP Pb with windows95

Post by steven » Tue, 03 Dec 1996 04:00:00



Quote:>I use Linux 2.0.26 with pppd 2.2.0f and a US Robotic Sportster 28.8 on
>the server side. My client is Windows95 with a generic 14.4.
>After 1 or 2 minutes or less linux disconect me. I've played with the
>mru and mtu, and it didn't resolve anything.
>Here is my ppp-log:

<log deleted>

Quote:>Dec  2 03:14:46 antigone pppd[1458]: sent [IPCP ConfAck id=0x3 <addr
>194.3.84.3>]
>Dec  2 03:14:46 antigone pppd[1458]: local  IP address 194.3.84.1
>Dec  2 03:14:46 antigone pppd[1458]: remote IP address 194.3.84.3
>Dec  2 03:14:46 antigone pppd[1458]: found interface eth0 for proxy arp
>Dec  2 03:14:50 antigone inetd[98]: /usr/sbin/nmbd: exit status 0x1
>Dec  2 03:15:05 antigone last message repeated 15 times
>Dec  2 03:15:41 antigone pppd[1458]: Hangup (SIGHUP)
>Dec  2 03:15:41 antigone pppd[1458]: Modem hangup
>Dec  2 03:15:41 antigone pppd[1458]: Connection terminated.
>These lignes are worrying me:
>Dec  2 03:14:50 antigone inetd[98]: /usr/sbin/nmbd: exit status 0x1
>Dec  2 03:15:05 antigone last message repeated 15 times
>Would that come from a LCP config request problem?
>Et que veux dire '/usr/sbin/nmbd: exit status 0x1'?

well, nmbd is a netbios nameserver, and is probably completely
unrelated to your ppp problem problem.

How about taking nmbd out of you /etc/inetd.conf. Or, look in
/var/log/nmbd.log (if its there)

Steve

 
 
 

1. Printing from Windows95 on SCO Merge to a remote Windows95 printer

Problem:
How is possible to print from a Win95 session (or Word, Excel) running
on OpenServer 5.0.4p with Merge 4.0 to a printer attached to a Windows95
machine?

I tried the following:

-share the printer Brother HL-8 attached to the Win95 machine

-from the command line:

/usr/vision/visionfs/bin/visionfs print
//Win95_station_name/printer_shared_name

and the printer works.

-define a printer in Merge with the following configuration file:

attachtype=spooler
failureaction=warn
printercommand=/usr/vision/visionfs/bin/visionfs print
//Win95_station_name/printer_shared_name

command:
mrgadmin printer add pj:path_to_the_file:"long name of the printer"

-add a printer Brother HL-8 under Winodws95 on Merge:

type Brother HL-8 (as the remote printer is)
port: pj

Could anybody give me a suggestion?

--

Please REMOVE the anti-spam termination from the email address

2. wtmp/wtmpx trimming

3. How? Windows95 to linux ppp

4. X.25 loopback on AIX 4.2 w/o hardware?

5. Windows95 PPP dial-up to Solaris 2.5

6. Unitree and UBACKUP

7. Linux-Windows95 PPP Connection

8. Why FreeBSD 4 is on 4 cd and FreeBSD 5 is only on 2 cd?

9. Slower ppp connect time with Linux than with Windows95?

10. Windows95 <--> Linux PPP data compression

11. PPP Server and Windows95

12. Setting up Linux PPP Server for dial in from Windows95

13. Windows95 and Linux PPP: FTP performance