Hi All,
Does anyone have a favorite 1000 base-T PCI card
they would recommend?
Also, it occures to me, is a standard PCI slot
fast enought to take advangare of 1000 base-T?
Many thanks,
-T
by Todd » Sat, 12 Mar 2011 06:50:33
Does anyone have a favorite 1000 base-T PCI card
they would recommend?
Also, it occures to me, is a standard PCI slot
fast enought to take advangare of 1000 base-T?
Many thanks,
-T
by General Schvantzkop » Sat, 12 Mar 2011 07:16:38
> Does anyone have a favorite 1000 base-T PCI card they would recommend?
> Also, it occures to me, is a standard PCI slot fast enought to take
> advangare of 1000 base-T?
> Many thanks,
> -T
by ein » Sat, 12 Mar 2011 19:29:12
>> Does anyone have a favorite 1000 base-T PCI card they would recommend?
>> Also, it occures to me, is a standard PCI slot fast enought to take
>> advangare of 1000 base-T?
> A standard PCI slot is marginal for 1G Ethernet, a PCI express slot is
> fine.
I use:
http://www.intel.com/design/network/products/lan/controllers/82541pi.htm
on standard PCI. Transfers I had were above 100 MiB/s and sometimes
AFAIR touches theoretical limit - 125 MiB/s.
Regards.
by Todd » Sun, 13 Mar 2011 02:39:12
I wondered. Thank you.Quote:> A standard PCI slot is marginal for 1G Ethernet, a PCI express slot is
> fine.
-T
by Todd » Sun, 13 Mar 2011 02:39:29
>>> Does anyone have a favorite 1000 base-T PCI card they would recommend?
>>> Also, it occures to me, is a standard PCI slot fast enought to take
>>> advangare of 1000 base-T?
>> A standard PCI slot is marginal for 1G Ethernet, a PCI express slot is
>> fine.
> IMHO Only Intel network cards.
> I use:
> http://www.intel.com/design/network/products/lan/controllers/82541pi.htm
> on standard PCI. Transfers I had were above 100 MiB/s and sometimes
> AFAIR touches theoretical limit - 125 MiB/s.
> Regards.
1. 10/100/1000 Base-TX adapter in 'forced' Gigabit mode
Hi.
At our site, we have a few Gigabit adapters installed on hosts running
AIX 5.2.
# lsdev -Cc adapter | grep ent
ent0 Available 5s-08 10/100/1000 Base-TX PCI-X Adapter (14106902)
However, we seem to be unable to force the link speed to "1000". When
I use the lsattr/chdev commands on the cards, the only valid values
for the 'media_speed' attribute seem to be :
# lsattr -REl ent0 -a media_speed
10_Half_Duplex
10_Full_Duplex
100_Half_Duplex
100_Full_Duplex
Auto_Negotiation
Is there a way to set the adapter to Gigabit speed ? Should we be able
to ?
Anyway, thanks for the feedback.
Sincerely,
John Smith
2. Problem mounting SyQuest EZ-135 using Adaptec 1510A/1520A/1522A
4. Can't deduct msgbuf from physical memeory
5. Enabling 10/1000/1000 NIC Card
7. How to force the speed of a 10/100/1000 ethernet card to 1000
9. 100 BASE-T / 10 BASE-T connection
10. question about diamond fire gl 1000
11. Solaris 8 disk & database performance question on Ultra 10 vs. Sun Blade 1000
12. FireGL 1000 Pro Color Depth Question
13. question about Diamond Fire GL 1000