tulip NIC works with kernel 2.4?

tulip NIC works with kernel 2.4?

Post by Cory Dunkl » Sun, 07 Jan 2001 12:26:01



Do tulip network cards (such as the Linksys LNE100TX v4.2) work properly
with the new kernel 2.4? If so how do I upgrade my Redhat 7.0 to the new
kernel? Thanks a lot.
 
 
 

tulip NIC works with kernel 2.4?

Post by Leon Bourass » Sun, 07 Jan 2001 17:04:47


I do not know the specifics on how to update the kernel, however, I saw the
changes list for the new kernel, and apparently they have fixed up support
for the tulip chipset cards.
There is many howtos online on how to upgrade the kernel.

Leon Bourassa
Network Admin

Quote:> Do tulip network cards (such as the Linksys LNE100TX v4.2) work properly
> with the new kernel 2.4? If so how do I upgrade my Redhat 7.0 to the new
> kernel? Thanks a lot.


 
 
 

tulip NIC works with kernel 2.4?

Post by Cory Dunkl » Sun, 07 Jan 2001 23:25:35


I checked around and didn't see any. If someone could point me to a site
that has one I'd appreciate it.


> I do not know the specifics on how to update the kernel, however, I saw
the
> changes list for the new kernel, and apparently they have fixed up support
> for the tulip chipset cards.
> There is many howtos online on how to upgrade the kernel.

> Leon Bourassa
> Network Admin


> > Do tulip network cards (such as the Linksys LNE100TX v4.2) work properly
> > with the new kernel 2.4? If so how do I upgrade my Redhat 7.0 to the new
> > kernel? Thanks a lot.

 
 
 

tulip NIC works with kernel 2.4?

Post by Igor Orlovic » Mon, 08 Jan 2001 14:55:37


The card does work fine under 2.4.0, as it has kernel driver for it. I've
also seen it working under 2.2.1x kernel with a promiscious mode enabled

> Do tulip network cards (such as the Linksys LNE100TX v4.2) work properly
> with the new kernel 2.4? If so how do I upgrade my Redhat 7.0 to the new
> kernel? Thanks a lot.

 
 
 

tulip NIC works with kernel 2.4?

Post by vincen.. » Tue, 09 Jan 2001 13:58:36


I use the driver found at sourceforge and it compiles and run fine under
2.4.0.

http://sourceforge.net/projects/tulip



Quote:> Do tulip network cards (such as the Linksys LNE100TX v4.2) work
properly
> with the new kernel 2.4? If so how do I upgrade my Redhat 7.0 to the
new
> kernel? Thanks a lot.

Sent via Deja.com
http://www.deja.com/