Network Config Question 4 all u gurus!

Network Config Question 4 all u gurus!

Post by Coenraad Loubse » Sat, 26 Feb 2005 19:35:13



I've got a setup like so:

ADSL Router:10.0.0.2
|
|10.0.0.3
SERVER
|192.168.0.1
|
AP:192.168.0.254-------Client:192.168.0.2
|
|
Client:192.168.0.3

I want 192.168.0.3 to be able to talk to 192.168.0.2, via the SERVER. (I
disable the AP forwarding the packets, for this purpose - client isolation)

How do I set it up?

THANKS!!

 
 
 

Network Config Question 4 all u gurus!

Post by Damiano Fasol » Mon, 28 Feb 2005 04:50:59


Is the connection between the AP and 192.168.0.2 a wireless link?

If so, I believe you cannot!

Bye
Dam


> I've got a setup like so:

> ADSL Router:10.0.0.2
> |
> |10.0.0.3
> SERVER
> |192.168.0.1
> |
> AP:192.168.0.254-------Client:192.168.0.2
> |
> |
> Client:192.168.0.3

> I want 192.168.0.3 to be able to talk to 192.168.0.2, via the SERVER. (I
> disable the AP forwarding the packets, for this purpose - client
> isolation)

> How do I set it up?

> THANKS!!


 
 
 

Network Config Question 4 all u gurus!

Post by Coenraad Loubse » Mon, 28 Feb 2005 19:24:25



Quote:> Is the connection between the AP and 192.168.0.2 a wireless link?

No it is not :D

Quote:

> If so, I believe you cannot!

..possibly with different subnets, but we don't care

Quote:

> Bye
> Dam
> > I've got a setup like so:

> > ADSL Router:10.0.0.2
> > |
> > |10.0.0.3
> > SERVER
> > |192.168.0.1
> > |
> > AP:192.168.0.254 ...... Client:192.168.0.2
> > :
 >>  :
> > Client:192.168.0.3

> > I want 192.168.0.3 to be able to talk to 192.168.0.2, via the SERVER. (I
> > disable the AP forwarding the packets, for this purpose - client
isolation)

> > How do I set it up?

> > THANKS!!

So,.. I'm not sure what the problem is. Maybe I should put the AP on a
different subnet alltogether, and then still leave the clients on 192.168...
I'll try that...

Aah Im so clueless.

 
 
 

1. Network Interface Driver for AIX - Questions for the Networking Gurus

Hi,
   I am looking for information on the AIX approach to writing
   Network Interface Drivers and how they compare and contrast
   with the BSD 4.1/4.3 style. I was unable to find any explicit
   references to this in the IBM documentation.
   So here are some basic questions:

1. What do I need to know about GDLC?

2. How does a device driver register itself with the right dlc?

3. How a device driver register itself with a protocol suite like TCP/IP
   Is using the "mktcpip" command the way?  It seems to insist on having
   a appropriate change method?

4. How does the driver advertise the MAC address of its Network Interface
   to the world? Related to this does the DLC take care of arp resolution
   and build up the MAC header for the driver.

Thanks very  much in advance,
/Mohan Dattatreya
Crescendo Communications

2. File encryption

3. A Simple Question for (Home) Networking Gurus

4. undelete utility for UNIX/Sun4.1.x ?!?!

5. calling all sendmail config guru's

6. OpenGL

7. Guru Wanted: Need Config Examples for Sendmail and Cnews Setups

8. What the hell....

9. network config question...

10. Network Config Question

11. Intial Network Config Question

12. Newbie question - pointers to useful 'masquerading' config for home network

13. Network Config Questions...