Hi, is anyone out there try to set up a router using Linux!
I'd try very hard to set it up but still fail!
Below is the topology of the LAN of my Linux Router.
18.104.22.168 (Netmask = 255.255.255.0)
| Linux Router |
22.214.171.124 (Netmask = 255.255.255.0)
Below is the section of the file /etc/rc.d/rc.inet1
/sbin/ifconfig eth0 126.96.36.199 netmask 255.255.255.0 broadcast
/sbin/ifconfig eth1 188.8.131.52 netmask 255.255.255.0 broadcast
/sbin/route add -net 184.108.40.206 netmask 255.255.255.0
/sbin/route add -net 220.127.116.11 netmask 255.255.255.0 dev eth1
note: this is a standalone network and it's no gateway.
Now, I can ping from the hosts on the network 18.104.22.168 to
22.214.171.124 but not to any other host on the network 126.96.36.199
The same for vice-versa.
I'm not running any router or gateway on the Linux.
Can anyone help me up about this?
p/s I have problem to access to the usenet, if possible pls e-mail to me.
Goh Nam Kwan
Science University of Malaysia
11800 Penang, Malaysia