Very Computer

Hi!

After upgrading to 2.2.19, neither xosview nor knetload display the
traffic on eth0, but on lo only! On the other hand, iptraf works
perfectly well (but it does not look that good in my panel ;-)). When
using procmeter I get the following:

~$ procmeter
ProcMeter: Unexpected 'ctxt' line in the '/proc/stat' file.
           No context
ProcMeter: Unexpected header line 1 in the '/proc/net/dev' file.
           No lpkt
           No fpkt, fpkt-rx & fpkt-tx
           No spkt, spkt-rx & spkt-tx

while /proc/dev/net looks like this:

Inter-|   Receive                                                |
Transmit
 face |bytes    packets errs drop fifo frame compressed
multicast|bytes    packets errs drop fifo colls carrier compressed
    lo: 1552228    6769    0    0    0     0          0         0
1552228    6769    0    0    0     0       0          0
  eth0:       0  116137    0 1078    0     0          0         0      
0   26081    0    0    0     0       0          0

Whats going wrong here?

Versions are
- xosview 1.7.3
- knetload 1.2
- KDE 1.1.2
- SuSE 6.3

Greetings
Torsten

Ive just compiled the via-rhine-driver from www.scyld.com, and now it
works!

Greetings
Torsten