Intel EtherExpress Pro 10/100 ISA 83800 NSC chipset.

by Aero-Graphics, Inc » Thu, 26 Mar 1998 04:00:00

Has anyone out there successfully setup a linux machine with an Intel
EtherExpress Pro 10/100 ISA nic that makes use of the National
Semiconductor 83800 chipset?

It would appear there is no driver for this particular card but I am not
100% sure of this. If anyone has information I would appreciate an email
greatly.

Thanks,
Jason Nielsen
http://www.dvoid.com (in the making)

Top

1. Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Hi,

I installed RedHat 6.1 on my PC(dual boot 98/Linux). Everything is fine
exception the RedHat can't recognize my ethernet card( Intel
EtherExpress ISA Pro 10/10+). The card works fine in 98.

During the installation, RedHat couldn't detect my card at all. So I
tried to load it manually. I tried two ways:
1. I put ether=5,0x210,0,0,eth0 ( the conf in my 98) in lilo.conf, then
reboot the machine. During the boot, lilo couldn't start eth0.
2. I run lsmod, I found nothing there. I do have
/lib/modules/2.2.12-20/net/eexpro.o file, so I said insmod eexpro. The
linux hangs forever. I have to power off the machine.

What did I do wrong? Please help!

Regards,
Michael

* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

2. a pc with real ip behind firewall

3. Intel EtherExpress ISA 10/100

4. MODVERSIONS

5. Intel EtherExpress Pro 10/100

6. Core dumping and X window problem

7. RedHat 6.0 & Intel EtherExpress Pro+ 10/100+Management PCI Ethernet Card

8. Solaris:/etc/system :: Linux:???

9. Intel Etherexpress Pro 10/100 Mobil adapter 32bit cardbus

10. Intel EtherExpress Pro 10/100 with 2.2.12