by How can I change the number of blocks assigned to md1 in the following
configuration? Do I need to include more info? mtab? fstab?
Thanks,
Neil D
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[1] hdc3[0]
264512 blocks [2/2] [UU]
md1 : active raid1 hda2[1] hdc2[0]
12972416 blocks [2/2] [UU]
md0 : active raid1 hda1[1] hdc1[0]
104320 blocks [2/2] [UU]
unused devices: <none>
Disk /dev/hda: 255 heads, 63 sectors, 4865 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 13 104391 fd Linux raid autodetect
/dev/hda2 14 4832 38708617+ fd Linux raid autodetect
/dev/hda3 4833 4865 265072+ fd Linux raid autodetect
Disk /dev/hdc: 255 heads, 63 sectors, 4865 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 13 104391 fd Linux raid autodetect
/dev/hdc2 14 4832 38708617+ fd Linux raid autodetect
/dev/hdc3 4833 4865 265072+ fd Linux raid autodetect