makes failing too often... :(

makes failing too often... :(

Post by Scott Fag » Thu, 05 Dec 1996 04:00:00

I'm running kernel 2.0.25 and gcc 2.7.0

THe last couple of source codes i've tried to compile (xtoolplaces,
xfilemanager, perftool) have all failed. I managed to get perftool
working after editing the source code.

I'm getting messages about asking addresses of register variables
(compiling xtoolplaces), altering the variable def's fixed the error
messages but the compiled binary 'Segment faults' when i run it.

The perftool sources complained about wrong variable types being passed,
so i did a lot of searching through the source code and found functions
with similary names ( ...._svc ) changed the source code, and it
compiled and worked!

What's going on here? Old gcc? Old libs? I'm lost? I don't know enough
about c to identify the problem.

(email would be nice)




1. Talk refused to talk:(:(:(:(

Hello there people:)...
  I had linux kernel 1.2.8 installed in my system. I have a SLIP/PPP
connection using either dip (for SLIP) or pppd/chat (for PPP).
  Now, Most of my network stuff are working fine without any problem at all
except talk. Talk works fine for local chatting. No problem at all. The
problem is when ever I call out to other machine (using the SLIP/PPP line),
nothing has ever happen. It got as far as Checking invitation stuff. Never
  Just out of curiosity I ran netstate to check the udp connection whenever
I have talk running. Running locally (talk that is) I got output as follow:

Active Internet connections
Proto Recv-Q Send-Q Local Address          Foreign Address        (State)
udp        0      0 lucifer.newpaltz.:1328 *:*                    

Which I presumed opened by talk (only one here because the other side hadn't
responded to the call yet).  I also get the same thing whenever I call
someone outside my system to talk. Of course, it never got to the other
system (I was waiting on the other system using telnet for the talk request,
never got there. And I had made sure that mesg was y).

Now when I call *IN* from other system (telnet to another system and run
talk over there to my system), I have (on my system) output as follow:

Active Internet connections
Proto Recv-Q Send-Q Local Address          Foreign Address        (State)

And also from netstat -a, I could find talk/ntalk were still listening.
Seems to me the call from outside didn't get through.

Now, since I haven't done anything to configure talk specifically, is there
anything I have to do to make this connection possible. Since I can't talk
to outside nor can I receive talk request from other hosts, I'm under the
assumption that my talk program somehow is not configured properly.

Any configuration file I have to check?
man, faq, howto, etc to refer to this kind of error?
May be replace my talk/ntalk/talkd/ntalkd with something else and where to
find it/them?
Does it depend on something in the kernel that I have to enable during the
compile time?
Wrong version altogether with the kernel?
Is it possible that talk needs long time to make the connection? (None of my
other stuff that I know of behave like this).
May be my inetd is broken?
If so, how do I check for it?
And where to find the latest version of it?

And while I'm at it, what's the latest version of talk?
Where to find it?
Is there a better chatting program that's backward compatible with talk?
Meaning that the program has more features than talk but at the same time
can be used to communicate with other regular talk program whenever the
program is not available on the other host.

Send comment and reply to:

2. Mapping streams resource usage to process id's (pid).

3. 2.1.7 locking up often :(

4. Installing Linux in Win2000

5. my trashed hard drive. :( :( :(


7. Dial up connection fails too often

8. 384 megs of RAM

9. Second PPP Attempt Often Fails

10. PAP often fails: log decode ?

11. NetBSD 1.4.1 'reboot' command often fails on HP-E60 (PIII)

12. patch fails often when patching kernel.

13. How do I get uucp to try more often when it fails to connect?