Did you try using the drivers disk?
Registered with the Linux Counter. http://counter.li.org
ID # 123538
Not as easy as I thought to install this Red Hat !
I have a Promise ultra 66 controller.
I succeed to get it to work and see my disk by using the correct
Now I put back in my Adaptec 2906 scsi controller.
My disk is not seen again and I got :
Kernel panic: VFS unable to moount rootfs
Is it possible, by passing parameter, to disable the probe of a pci
port. (As I don't really need my Adaptec card under linux right now)
I have a strange behavior -under windows- that might give you a clue of
the problem :
without the Adaptec card :
i/o range of the Promise card : 0x1408
with the Adaptec card :
i/o range of the Promise card : 0x1808 (!)
Both card are using the same irq (3).
A more general question would be :
where to find information on possible parameters for ide, irq...
Thanks a lot for your help.
Sent via Deja.com http://www.deja.com/
Before you buy.
This is a compile failure on 2.5.41, compiled for a PII using gcc-3.0.4.
Just about all options configured as 'm'.
gcc -Wp,-MD,arch/i386/pci/.irq.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-proto types -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common - pipe -mpreferred-stack-boundary=2
-march=i686 -Iarch/i386/mach-generic -nostdinc
-iwithprefix include -DKBUILD_BASENAME=irq -c -o arch/i386/pci/irq.o
drivers/ide/ide-probe.c: In function `hwif_init':
drivers/ide/ide-probe.c:1026: `HD_IRQ' undeclared (first use in this function)
drivers/ide/ide-probe.c:1026: (Each undeclared identifier is reported only once
drivers/ide/ide-probe.c:1026: for each function it appears in.)
make: *** [drivers/ide/ide-probe.o] Error 1
make: *** [drivers/ide] Error 2
make: *** [drivers] Error 2
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/