by Czyz-M » Sun, 10 Dec 1995 04:00:00
I have a Stealth 64 chipset:964. I'm using the S3 server. I do not get
any errors on the startup.
However, when I use the SVGA server, all of the functions work, but I do
not get a res higher than 320x300.
I have a Relisys RE1420 monitor.
Help!
--
by root » Tue, 12 Dec 1995 04:00:00
<ctrl><alt>"+" and/or <ctrl><alt>"-"
to cycle through your configured (and working) resolutions. If you can
change the mode up to 1024x or 1280x, then you just have to edit one
either your /etc/XF86Config or your user-specific defaults to select the
proper mode. Which one / how do you do this? I don't know; I've never
had to. Anyone else know?
Todd Lewis
VP Networking
Cheney Communications Company
> Help! When starting X, I get a black screen with the mouse pointer
> visable and not moving.
> I have a Stealth 64 chipset:964. I'm using the S3 server. I do not get
> any errors on the startup.
> However, when I use the SVGA server, all of the functions work, but I do
> not get a res higher than 320x300.
> I have a Relisys RE1420 monitor.
> Help!
> --
1. Diamond Stealth 64 964Chip Black Screen
HELP! I'm getting a black screen with a visable mouse which does not move.
With the SVGA server, everything works but I can't get a res higher than
320x300.
My monitor is a Relisys RE1420. In windows I have to use the IBM8514
Diamond driver for my display to work.
What should I be using? Is my Monitor setting right?
HELP!HELP!
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) S3: Graphics device ID: "Diamond Stealth 64 VRAM"
(**) S3: Monitor ID: "Relisys"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/"
Not sure about this (it has not effect1)
(**) S3: Option "s3_964_bt485_vclk"
(**) S3: Option "diamond"
(--) S3: card type: PCI
(--) S3: Diamond Stealth BIOS found
(--) S3: chipset: 964 rev. 1
(--) S3: chipset driver: mmio_928
(**) S3: videoram: 2048k
(**) S3: Ramdac type: normal
(--) S3: Ramdac speed: 110
(**) S3: Using ICD2061A programmable clock
(--) S3: Maximum allowed dot-clock: 110.000 MHz
(**) S3: Mode "640x480": mode clock = 25.175
(**) S3: Mode "800x600": mode clock = 36.000
(--) S3: Using 6 bits per RGB value
(**) S3: Virtual resolution set to 800x600
--
2. RedHat 7.2, KDE printing postscript on non-postscript printers
3. Diamond Stealth 64 -> BLACK SCREEN!!
4. Finally success with install of R5 on adaptec ultra2
5. (fwd) Re: help: X runs on Diamond Stealth 64, but the screen wraps around!
6. IBM ThinkPad 560X - MagicGraph 128XD
7. Diamond Stealth 64 Screen Saver
8. Touchscreen
9. Diamond Stealth 64 Video VRAM Problem (Blank Screen)
10. Diamond Stealth 64 Screen Saver
11. help: X runs on Diamond Stealth 64, but the screen wraps around!
12. Screen & font corruption - Diamond stealth 64 & XFree
13. Diamond Stealth 64 S3Trio and screen edges