Very Computer

1. kernel-recompilation due to network-problems

Hello!

I'm using a (SuSE) Linux-system with Kernel 2.0.33. Now I need a new
Kernel - version 2.0.36.

I followed all instructions to configure it. "make dep" and "make clean"
worked fine, but "make zImage" cancels with the following message:

gcc -D__KERNEL__ -I/usr/src/linux-2.0.36.SuSE/include -V2.7.2.3 -Wall -Wstri
ct-p
rototypes -O2 -fomit-frame-pointer -fno-strength-reduce -pipe -m486 -malign-
loop
s=2 -malign-jumps=2 -malign-functions=2 -DCPU=586  -c -o init/main.o
init/main.c

gcc: installation problem, cannot exec `cc1': No such file or directory
cpp: output pipe has been closed
make: *** [init/main.o] Error 1

Maybe I should mention, that I used a source-code patch for an olicom
tokenring-card (olicom-2.0.36). But this source-code patch could be applied
without problems.

How can I run the "make zImage" sucessfully?

Thank you!

Erich

2. Sunray with NT DHCP

3. Kernel 2.1.28 Networking problems

4. KDE News reader question

5. Network problem, kernel compile problem

6. Can't hook to the internet w/ RH 6.0

7. Establishing network communication Kernel to Kernel

8. firmware upgrade on Ultra-2 - how?

9. Kernel 2.2 Network Drivers to Kernel 2.4?

10. Network problems w/ Kernel 2.2.1

11. network configuration problem with new kernel

12. Network interrupt pause problem in 2.5.38 kernel

13. kernel & network problems