by Andry William Ratsimandres » Sat, 05 Jun 1999 04:00:00
I guess you meanQuote:> And I tried bzimage and zlilo to no avail.
http://www.ccbb.ulpgc.es/fisica/usuarios/andry/
===================================================================
by Paul Rowlan » Sat, 05 Jun 1999 04:00:00
This is the best most efficient compile I've ever done. But I still hang
at:
Ok booting the kernel.
The kernel size, depending on options, runs between 400k and 500k. And I
tried bzimage
and zlilo to no avail.
My kernel is 2.2.9 on SuSe 6.1 333 Mhz 128 mb ram. Any suggestions?
Thanks.
1. Boot still hangs at: Ok booing the kernel
make dep;make clean;make;make modules;make modules_install;make install;
lilo
This is the best most efficient compile I've ever done. But I still hang
at:
Ok booting the kernel.
The kernel size, depending on options, runs between 400k and 500k. And I
tried bzimage
and zlilo to no avail.
My kernel is 2.2.9 on SuSe 6.1 333 Mhz 128 mb ram. Any suggestions?
Thanks.
3. diskless boot hit error while booting kernel, cannot find boot device, dhcp problem?
4. Goldstar cdrom audio reading
5. Kernel 2.4.18-xfs-1.1 - Ok, booting the Kernel and then frozen
7. Booting from SLS1.03 -> crc error, from HLU boot/root is ok?
9. mount errors when booting from HD, ok booting from diskette
10. 4.1 SCSI boot fails, 4.0->4.1 upgrade boot OK
11. boot hangs at INIT: version 2.69 booting
12. init 2.76 hangs on boot -- not running /sbin/init.d/boot
13. Boot hangs at "G mp_picinit" with 5.0.5 boot diskette