by Al Longye » Sun, 29 Jan 1995 11:28:38
Specify the BPS rate on the pppd execution line.Quote:> I am using PPP 2.1.2b and the Slakware distributed version of uucp
>with a generic 16550 clone serial board with an Intel modem.
>If I boot the system then I can use ppp to connect up to my provider, but
>if I use uucico to dial up my mail forwarder and transfer my mail then
>thereafter ppp will fail.
1. PPP Connection not working after reboot?
We have a modem connected to a tty, I adjust the modem parameter with
the 'cu' command, and when the computer is repowered, and I try to login
I only get scrap.
I think the speed between modem and computer is wrong when I don't
connect
(with cu) to the modem.
Should I put somewhere a 'echo atz > /dev/ttyx' in the startup files?
2. XFree86 3.1 puts crud on COM4?!
3. PPP working, /etc/ppp/ip-up not working, HELP Please
7. Can Not umount NFS drive without rebooting System
8. How can I tell what grub will do on the next reboot without rebooting?
9. PPP works, now mail with UUCP???
10. HOW TO MAKE PPP DIAL-OUT WHEN CU & UUCP WORK FINE
11. UUCP not working