ThinkPad360PE pen don't work

ThinkPad360PE pen don't work

Post by Youichi Sat » Sun, 31 Dec 1899 09:00:00



Hello,

I have a ThinkPad360PE(very old) ,and trying to use pen on linux.
XFree86's version is 3.2 ( and tried with 3.3.3) and kenel is 2.2.14
I use wacext(wacom extension) and tpdualscan -d.

X log say "Timeout while reading Wacom tablet."
maybe I think serial is invalid.so I try ps2 command from DOS and BIOS.
(ps2 serial on , ps2 irqpen 5, ps2 addpen 2e8 etc... )
but I can't use pen yet!

Do you know how to use serial /dev/ttyS3(=pen?).

Thanks,
Youichi Sato

---------------
(**) Adding extended device "WacomPen" (type: Wacom Stylus)
(**) Adding extended device "IBM_Trackpoint" (type: Mouse)
BEGIN xf86WcmProc dev=0x82634b8 priv=0x82552a0 type=stylus private_flags=9
what=
0
xf86WcmProc pWcm=0x82634b8 what=INIT
xf86WcmControlProc
opening /dev/ttyS2
initializing tablet
reading model
Timeout while reading Wacom tablet. No tablet connected ???
END   xf86WcmProc Success what=0 dev=0x82634b8 priv=0x82552a0
BEGIN xf86WcmProc dev=0x82634b8 priv=0x82552a0 type=stylus private_flags=9
what=
1
xf86WcmProc pWcm=0x82634b8 what=ON
opening /dev/ttyS2
initializing tablet
reading model
Timeout while reading Wacom tablet. No tablet connected ???

 
 
 

1. Oh, fooey -- drivers don't work, rpm doesn't work

Hi all, I'm trying to install Red Hat 7.3 on a Dell c840 laptop.  I know
from installing on my previous c810 you must get drives for the nvidia
video card. I got them from nvidia's site.  
I installed them with

rpm -i NVIDIA_GLX-1.0-2960.i386.rpm

and

rpm -i NVIDIA_kernel-1.0-2960.rh73up.i386.rpm

and in XF86Config-4   changed  nv to nvidia and commented out Load dri.

but I get errors. ONe says my OS is i686 but there is no 686 GLX file on
the Nvidia site.
Then it says
failed to load module GLcore (module does not exist, 0)
failed to initialize the NVdriver kernel module!
aborting
screens found, but none have a usable configuration

fatal server error:
no screens found

So I thought I'd at least try to use the i686 kernel, and downloaded it.
I wanted to remove the i386 kernel, but

rpm -e NVIDIA_kernel-1.0-2960.rh73up.i386.rpm

got me "NVIDIA_kernel-1.0-2960.rh73up.i386.rpm not installed"

so I did

rpm -q NVIDIA_kernel-1.0-2960.rh73up.i386.rpm

and it said "NVIDIA_kernel-1.0-2960.rh73up.i386.rpm installed"

So rpm doesn't know if it's there or not, I can't remove it, and try the
i686, so I am bigtime stuck.

Anybody know where to point me?

Thanks
Jim

2. Alpha or Intel?

3. 'batch' and 'at' don't work

4. Multiple Document Roots

5. 'make' and 'gcc' don't work

6. Reading is much more interesting than TV (1105/1708)

7. 'stty -opost' or 'stty -onlcr' don't work ?!

8. how to access floppy drive

9. ? Red Hat 6.1 'apropos' don't work.

10. 'gcc foo.c -g -lX11' don't work?!?

11. Linux-Router works fine, just special IPs don't work.

12. Newbie: X works but no fonts don't work

13. telnet to linux Backspace work; rsh xterm Backspace don't work