by I got my copy of Caldera Preview II and installed it using the graphical
install. X ran fine during the install processes, but after the reboot
I get errors when I run startx. I ran the xfconfig program to make
sure that it was setup for my video card, but I get the same errors.
I have a P5/60 with a Cirrus Logic 5430 PCI video card. At the
bottom of this message, I have included a list of the messages that
I get when I run startx.
Thanks for any help that you can provide.
Donnie
**********************************************************************
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, ncr77c22, ncr77c22e,
vgawonder, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000,
oti067, oti077, oti087, cl6410, cl6412, cl6420, cl6440, generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /etc/XF86Config waiting for X server to shut down X connection to :0.0 broken (explicit kill or server shutdown).
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) VGA16: Graphics device ID: "Generic VGA"
(**) VGA16: Monitor ID: "Sony"
(--) VGA16: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted
(--) VGA16: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) VGA16: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/
(**) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(--) VGA16: clocks: 25.25 28.32 31.50 78.35
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(**) VGA16: Mode "640x480": mode clock = 25.175, clock used = 25.250
(--) VGA16: There is no mode definition named "800x600"
(--) VGA16: Removing mode "800x600" from list of valid modes.
(**) VGA16: Virtual resolution set to 800x600
fvwm: can't get font fixed #menu/icons
Looking Glass terminated on signal 11