Installing Linux stop

Installing Linux stop

Post by Laurent Fontan » Sat, 25 Apr 1998 04:00:00



Hello !

I try to installing Linux but I'can't...

System stopped when I try to make partition.

Config :

GA-586HX with Award Bios 4.51 (Falsh-Bios 2.6, Final Release)
2 HD (4GB + 1,3 GB) on 1. controller
1 ATAPI CD-ROM on 2. controller
Adaptec AHA2920 (fdomain)

Can you help me ?
Laurent

 
 
 

Installing Linux stop

Post by Theodore Witkam » Sun, 26 Apr 1998 04:00:00



> Hello !

> I try to installing Linux but I'can't...

> System stopped when I try to make partition.

> Config :

> GA-586HX with Award Bios 4.51 (Falsh-Bios 2.6, Final Release)
> 2 HD (4GB + 1,3 GB) on 1. controller
> 1 ATAPI CD-ROM on 2. controller
> Adaptec AHA2920 (fdomain)

> Can you help me ?
> Laurent

  you might try to not install your scsi controler and see if that works
then once you get your system runing get you scsi controler running

 
 
 

Installing Linux stop

Post by J.M. Pad » Mon, 27 Apr 1998 04:00:00



>Hello !
>I try to installing Linux but I'can't...
>System stopped when I try to make partition.
>Config :
>GA-586HX with Award Bios 4.51 (Falsh-Bios 2.6, Final Release)
>2 HD (4GB + 1,3 GB) on 1. controller
>1 ATAPI CD-ROM on 2. controller
>Adaptec AHA2920 (fdomain)

Visit the following site.  It is part of an excellent online Basic
Linux course.  This URL covers the partition procedures.

http://home1.gte.net/henryw/basic/basic03.htm.html

Regards,

 "F. Nietzche will be a bore"
    -Plato

 
 
 

Installing Linux stop

Post by Laurent Fontan » Mon, 27 Apr 1998 04:00:00


Hi !

I've try without SCSI. Don't work better ...

Another Idea ?

Tahnaks a lot
Laurent



>> Hello !

>>[...]
>> I try to installing Linux but I'can't...
>> GA-586HX with Award Bios 4.51 (Falsh-Bios 2.6, Final Release)
>> 2 HD (4GB + 1,3 GB) on 1. controller
>> 1 ATAPI CD-ROM on 2. controller
>> Adaptec AHA2920 (fdomain)
>>[...]
>  you might try to not install your scsi controler and see if that works
>then once you get your system runing get you scsi controler running

 
 
 

1. Q: Installing Redhat6.2 will stop at 'Installing Packages'

Hi,
sorry for my poor english.

I need to install Redhat 6.2 (sorry for not 7.2) into my PC,
which has 100GB Harddisk(Western Digital ATA 100, CHS=12161/255/63).
And I got hung up installing at 'Installing Packages'.
No packages are installed.

I sliced harddisk like the following:
  primary 1 (10GB) Win FAT32
  primary 2 ( 2GB) Linux ext2
  primary 3 ( 1GB) Linux swap
  extended 5 (87GB) Linux ext2

# I heard that I should install linux within 1024 cylinder.
# But I'll boot from floppy, so I sure it is not problem.

I thought that the cause of hung-up was about recognizin harddisk,
which means about LBA32 or CHS.
I booted from CD-ROM with 'linux lba' or 'linux hda=12161,255,63',
but both were not be succeeded.

I have no more idea.
Could you give me any advices?

Regards,
kwatch

2. pppd in Corel Linux

3. Linux install stops!!!!!

4. fsck reconnected directories question

5. FIPS Error with Windows95 stopping Linux Install

6. Scsh (a Unix Scheme shell) FAQ

7. Linux-Mandrake install stops when trying to initialize CDROM drive

8. tcp_wrapper

9. problems installing any distro of linux, stops at "LI"

10. After installing Linux, it boots up to "LI" and then stops

11. How to stop [1] + Stopped (tty input) message and let prog run

12. stopping "cd .." ....list all our users directories, and STOPPING SPAM!!!

13. Can't stop MySQL: /etc/init.d/mysqld stop [FAILED}