I have a 336-VSCi modem in a Presario 8716 - it only works with
Windoze 95 - It's a Winmodem therefore you cannot use it with Linux.
/John
Comments are mine all mine. Reply to newsgroup. Replies to above
email address will be binned.
by John Kenyo » Wed, 08 Jul 1998 04:00:00
/John
Comments are mine all mine. Reply to newsgroup. Replies to above
email address will be binned.
1. Help: Modem doesn't work -- Compaq Presario 336-VSC Modem
I'm using a Compaq Presario 336-VSC Modem which works very well under
Win95. But it seemed that linux can't recognize it at all. When I run
kermit, I got an error message as follows,
C-Kermit> set line /dev/cua1
C-Kermit> /dev/cua1 is not a terminal device
C-Kermit> sorry, can't open connection to /dev/cua1
When I am trying setserial -a /dev/ttyS1, the irq(3) and port(0x02f8)
are ok but uart is UNKNOWN.
It's a fax-modem connected to COM2 and thus the device name should be
/dev/cua1 and /dev/ttyS1.
Could you please give me any idea about what is going wrong? Do I need
a special device driver?
Lizhan Yao
2. Configure Netscape on AIX ?
3. Drivers for Compaq Presario 336-VSC Modem (ATT Controlerless Modem)
4. : Comm. between 2 UNIX boxes.
5. Compaq Presario 336-DF 56k Upgradeable Modem & Linux
6. X on PCs???
8. ppp connects then modem drops
10. Hayes 336 fax/modem PCMCIA problem w/RH 6.1 -- can't activate modem
11. Practical Peripherals 33.6 Half Card II setup (Practical Model 4718US, Practical 336 Flash HC)
12. How to install an internal TPlink 336 modem (Davicom)?
13. Newbie with a Hayes Optima 336 external modem