rh7.1: delaying eth0 initialization?? eth0 startup fail?

rh7.1: delaying eth0 initialization?? eth0 startup fail?

Post by Nevin Won » Sun, 11 Nov 2001 12:43:02



Hi

I've wiped out my rh7.2 and downgraded to rh7.1, the system works
fine, however after some messinag around with linuxconf, i can't start
up my eth0 anymore. When i try to start it up, it saids :

Starting eth0: delaying eth0 initialization     [failed]

I've checked my network configurations and network scripts and
couldn't see what the problem is. Anyone out there help me? I don't
want to reinstall it AGAIN. Thanks.

Cheers,
Nev
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Nevin Wong        | nevin at netvigator dot com
Nevolution        | http://nev.hello.to/
Model Making Ring | http://modelmakingring.hello.to

 
 
 

rh7.1: delaying eth0 initialization?? eth0 startup fail?

Post by Michael Mitchel » Mon, 12 Nov 2001 05:31:52


You didn't say what kind of ethernet card or what module was being used.
That is most likely the cause.  Kudzu is good but not always 100% accurate

> Hi

> I've wiped out my rh7.2 and downgraded to rh7.1, the system works
> fine, however after some messinag around with linuxconf, i can't start
> up my eth0 anymore. When i try to start it up, it saids :

> Starting eth0: delaying eth0 initialization     [failed]

> I've checked my network configurations and network scripts and
> couldn't see what the problem is. Anyone out there help me? I don't
> want to reinstall it AGAIN. Thanks.

> Cheers,
> Nev
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Nevin Wong        | nevin at netvigator dot com
> Nevolution        | http://nev.hello.to/
> Model Making Ring | http://modelmakingring.hello.to


 
 
 

rh7.1: delaying eth0 initialization?? eth0 startup fail?

Post by Nevin Wo » Tue, 13 Nov 2001 15:14:30



> You didn't say what kind of ethernet card or what module was being used.
> That is most likely the cause.  Kudzu is good but not always 100% accurate

It's an ethernet card using Realtek chipset. I don't remember which
exactly is the chipset, but since there is only one kernel module
choice for Realtek cards... I've tried choosing different modules,

Nev

 
 
 

1. eth0 and eth1 "Delaying eth0 Initialization" and "Delaying eth1 Initialization" errors

Hello, I am a linux newbie, and have run into a problem.

I am using RH 7.1 with kernel 2.4.2.  I built a new kernel (to be used for
firewall purposes).  The kernel built fine and it booted successfully except
that with both eth0 and eth1, the errors "Delaying eth0 Initialization" and
"Delaying eth0 Initialization" come up.  I did not have this problem with
the original kernel.

Both NICs are Linksys LNE100TXs using the 169 chip.  The ipcfg-eth0 and 1
are set to activate on boot.

Any ideas?

Thank you,

Alan

2. Where do i complain/comment/suggest improvements for Konqueror

3. What does Bringingup eth0: Delaying eth0 initialization <Failed> mean?

4. Changing user names

5. eth0 error "Delaying eth0 initialization"

6. script "kiss.c"?

7. Delaying eth0 initialization problem with RH7

8. problem with old hd and new(1.3.100) kernel

9. delaying eth0 initialization [FAILED]

10. Delaying eth0 initialization [Failed]

11. delaying eth0 initialization FAILED

12. delaying eth0 initialization [FAILED]

13. Delaying eth0 initialization