Board index Linux Setup

DIP tty open (/dev/modem, RW):Device or resource busy???

DIP tty open (/dev/modem, RW):Device or resource busy???

Post by rodney pi » Tue, 01 Aug 1995 04:00:00



Greetings,

I get the mentioned error when I initiate DIP.  I have an external
modem which after resetting the power, the error goes away and I am
able to start my slip session.  Any ideas on how I can avoid this
error?  Should I be concentrating my efforts on the Linux end or the
modem end.  Any help would be greatly appreciated.

Cheers,
--
---------------------------------------------------------

 Bell-Northern Research  *  Phone: 613-763-3261
 Standard disclaimers... - Opinions...if any are my own.

 
 
 
Top

1. modem: device or resource busy for dip

When I run dip, I get the error "device or resource busy".  I've tried
rc.serial, but it gives the same error.  My drive is partitioned and I
use windoze95, and the dial-up programs work great for it.

I'm new to linux, so I need some concrete filenames to check or things
to do.  Thanks.  (Info by e-mail appreciated.)

trent larson

2. fvwm2: What Happened to Automatic Icon Placement

3. /dev/modem: Device or resource busy

4. Advice on shell script to output only lines that do not exist in file

5. /dev/modem: Device or Resource Busy

6. Moving the boot disk

7. /dev/modem: device or resource busy

8. XFree and SS24x

9. /dev/ttyS2 (/dev/cua2) reports "device or resource busy" on kernel 2.1.95

10. parallel cd-rw "device or resource busy"

11. Dip problem, - Device or resource busy

12. /dev/md0: Device or resource busy

13. Floppy: /dev/fd0: Device or resource busy


All times are UTC
Board index