Very Computer

1. NAS and /dev/audio busy!!!!!

I recently downloaded the binaries for the Network Audio SYstem (NAS)
and it works fine.  In order to use the tools in it such as auplay, I
have to make my computer a network sound server by using the command
au -aa

The problem is that when I do this, I can't run anything else that
accesses /dev/audio.

Is there a way to correct this?

--
===============================================================
=       Clayton Workman        =            R=V/I             =
=      1001 S. Wright St.      =        ____/\/\/\____        =
=     Champaign, IL 61820      =                              =
=       (217) 344-5910         =    University of Illinois    =

=-------------------------------------------------------------=
=             http://www.cen.uiuc.edu/~cw12699                =
===============================================================

2. tcsh - if syntax

3. /dev/dsp, /dev/audio, /dev/midi., /dev/sndsta

4. News & IRC

5. NAS (Network Audio System) and audio support in general

6. missing harddrives duriing install

7. Audio mixer for /dev/audio or USB audio?

8. "DataRequest Error", e2fsck, badblocks, etc.

9. NAS (Network Audio System) as a kernel module?

10. Setting up Network Audio System (NAS)

11. Network Audio System (NAS) on 2.1.5R

12. Audio probs and other qs

13. 2.2.1 and /dev/dsp and /dev/audio