I just purchased an asus board and an S1365 noname ncr 875 scsi card.
Assuming that I could boot from floppy and see the disk, I used the
scsinet boot (as well as the n_53c7xx.s) one.
When the system comes up the on-board bios sees the drive and scsi
card. When booting starts, I get this:
Unknown PCI device (1000:F) ...
... more booting
Then it gets to:
NCR53c406a No available ports found
SCSI: 0 hosts
SCSI: detected total
There is a WORKING disk connected to it. I checked all termination
issues and all is well.
The Unknown PCI devices bothers me since 1000 is suppose to be NCR.
I need to determine if the scsi card is not functioning (since it was
beat-up by the shipping company) or if it is indeed a driver issue --
which sounds more reasonable..
Any IDEAS? I need to determine this pretty quickly.
Jim Ray Harris Semiconductor
Phone: (407) 729-5059 Melbourne, FL 32901