Driver for Trantor T348 SCSI - parallel port

Driver for Trantor T348 SCSI - parallel port

Post by Guichard Freder » Wed, 31 May 1995 04:00:00



Does anyone have the driver for this adapter ?
 
 
 

1. Trantor T348 Parallel to SCSI Host Adapter Driver Support For Linux?

There is an experimental driver for the T348, check out

        http://www.torque.net/linux-pp.html

But ...

-  The T348 itself does not support EPP, so it is slow and really
   only useful for CDroms.  You would not be satisfied with the
   performance if you tried to use it for your root filesystem.

-  No standard distribution contains support for running a system from
   a parallel port disk.  There is a ZIP drive installation mini-HOWTO
   that might give you some clues as to how to make it work, but not
   before you have the system and drive up and running by some other
   means.

-  You will never be able to boot from a T348 or any other parallel port
   device.  Booting relies on the PC's BIOS, which doesn't know anything
   about how to boot from a parallel port (and there are more than a
   dozen different parallel port protocols).

--

--------------------------------------------------------------------------

--------------------------------------------------------------------------

2. Hard drive parameters

3. Trantor T348 Parallel SCSI Host Adapter

4. Fundamental problem connecting win98 to Mandrake 7.1

5. Trantor T338 Parallel Port SCSI driver

6. setting up a restricted shell in Solaris 8?

7. Update 3005

8. Parallel to SCSI Drivers / Parallel Port Drivers

9. Trantor T348 Mini SCSI supported ?

10. TRANTOR SCSI ON PARALLEL PORT: anyone using?

11. Trantor T-348 Parallel to SCSI Converter Drivers

12. Parallel to SCSI / Parallel Port Drivers