My pppd will dial, "connect", and then fail. The message in syslog
is "serial line appears to be looped back".
Any ideas? Is my IP address in the pppd command line the culprit?
linux 1.1.59
internal Zoltrix 28.8 modem
Thanks,
by Stephen Mahe » Wed, 01 Feb 1995 03:48:39
Any ideas? Is my IP address in the pppd command line the culprit?
linux 1.1.59
internal Zoltrix 28.8 modem
Thanks,
by Stephen Mahe » Sat, 04 Feb 1995 23:52:01
> My pppd will dial, "connect", and then fail. The message in syslog
> is "serial line appears to be looped back".
> Any ideas? Is my IP address in the pppd command line the culprit?
> linux 1.1.59
> internal Zoltrix 28.8 modem
> Thanks,
1. pppd "Serial line looped back"
I'm running diald-0.14 and pppd-2.2.0 on my Linux 2.0.13 system with
success most of the time. However, once in a while (several times a day),
the system gets into a state where the pppd dies immediately after
connecting, with the syslog message "Serial line looped back." diald
reports disconnected after 5 seconds. This repeats 4 or 5 times, and then
it will finally decide to connect.
What does "Serial line looped back" mean? I've been trying to identify
whether it's only certain IP traffic that causes it, but I've not yet been
able to do so.
Any clues?
Providenza & Boekelheide, Inc.
2. Configuring a diskless workstation
3. "PPP error: Serial line is looped back" HUH?
4. Help, qdaemon has gone wacko...
5. pppd reports "serial device is looped back"
6. Modelines for MicroScan 5AP/ADI
7. "Serial line is looped back" problem
8. Is Sony CDU-31A worth it with Linux?
9. "serial line is looped back"?
10. "Serial Line is Looped Back". ?
11. "Serial line is looped back"
12. Serial line "looped back"?
13. (tried all possibilites) "serial line looped back" in PPP setup