Problem w/ Slack2.3 setup - can't load dynamic linker '/lib/ nor /usr/i486-linux/'

1. Can't load dynamic linker '/lib/'

I am using the Slackware 2.0.0 to install Linux 1.1.18.  This is being done on
a 486 with 8meg, and on a system that has OS/2 and MSDOS currently installed.

I made a primary partition for Linux (100meg) and a 5meg swapfile on a logical
partition (yes, it's small---too small?).  This I did with OS/2's fdisk.

I then went through the installation process with the Slackware boot and
install disks.  I tagged the partitions as 82 & 83, and formatted them within
the installation process.

When I boot up, I get to OS/2 boot manager, where I select the Linux option.
Lilo starts up, but gets hung on loading the dynamic linker:

    init: can't load dynamic linker '/lib/'

I did place LILO in the superblock during setup, and chose for it to load

Is this linker missing from that distribution?  If so, how would I properly
uncompress it.

Any suggestions or comments would be appreciated

Thank you.


2. Logging on from PCs to a Linux box with X

3. can't load dynamic linker '/lib/'

4. SMC7004BR Barricade Router: Anybody using one?

5. Please help: Complete FreeBSD book

6. DIP:can't load dynamic linker '/lib/'

7. Stuck setting MILO options in AlphaBIOS!

8. Can't load dynamic linker '/lib/' message

9. /lib/ cache '/etc/' has wrong version ?

10. Netscape 2.0 error: 'Can't load /lib/'

11. error: phigsmon: can't load linker /lib/ ??

12. /lib/ld: cache 'LD.SO.CACHE' is corrupt (or equivelent)