AMANDA setup

AMANDA setup

Post by Frank Winkle » Thu, 25 Feb 1999 04:00:00



Hi there !

I'm trying to set up AMANDA on a Linux box. 'amcheck' finally works well
with my config, but when I try to initiate a dump manually, I get:

amdump: start at Tue Feb 23 19:51:24 MET 1999
planner: pid 30196 executable /usr/lib/amanda/planner version 2.4.0b6
planner: build: VERSION="Amanda-2.4.0b6"
planner:        BUILT_DATE="Sat Aug 22 06:14:01     1998"
planner:        BUILT_MACH="Linux Mandelbrot.suse.de 2.0.35 #2 Fri Aug
21 12:41:
11 MEST 1998 i686 unknown"
planner:        CC="gcc"
planner: paths: bindir="/usr/bin" sbindir="/usr/bin"
planner:        libexecdir="/usr/lib/amanda" mandir="/usr/man"
planner:        CONFIG_DIR="/etc/amanda" DEV_PREFIX="/dev/"
planner:        RDEV_PREFIX="/dev/r" GNUTAR="/bin/tar"
planner:        COMPRESS_PATH="/usr/bin/gzip"
planner:        UNCOMPRESS_PATH="/usr/bin/gzip" MAILER="/usr/bin/Mail"
planner:        listed_incr_dir="/var/lib/amanda/gnutar-lists"
planner: defs:  DEFAULT_SERVER="Mandelbrot.suse.de"
planner:        DEFAULT_CONFIG="DailySet1"
planner:        DEFAULT_TAPE_SERVER="Mandelbrot.suse.de"
planner:        DEFAULT_TAPE_DEVICE="/dev/nst0" HAVE_MMAP HAVE_SYSVSHM
planner:        LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE BSD_SECURITY
planner:        CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP
planner:        COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
planner:        COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
READING CONF FILES...
driver: pid 30197 executable /usr/lib/amanda/driver version 2.4.0b6
driver: send-cmd time 0.015 to taper: START-TAPER 19990223
startup took 0.057 secs

SETTING UP FOR ESTIMATES...
setting up estimates for einstein:hda2
einstein:hda2 overdue 10646 days for level 0
driver: started dumper0 pid 30199
driver: started dumper1 pid 30200
taper: pid 30198 executable taper version 2.4.0b6
setup_estimate: einstein:hda2: command 0, options:
    last_level -1 next_level0 -10646 level_days 0
    getting estimates 0 (0) -1 (-1) -1 (-1)
setting up estimates took 0.048 secs

GETTING ESTIMATES...
dumper: pid 30199 executable dumper version 2.4.0b6, using port 1015
dumper: pid 30200 executable dumper version 2.4.0b6, using port 1016
taper: read label `m-sys3' date `19990223'
error result for host einstein disk hda2: missing estimate
getting estimates took 0.114 secs
FAILED QUEUE:
  0: einstein   hda2
DONE QUEUE: empty

ANALYZING ESTIMATES...
planner: FAILED einstein hda2 0 [missing result for hda2 in einstein
response]
INITIAL SCHEDULE (size 264):

DELAYING DUMPS IF NEEDED, total_size 264, tape length 1945600 mark 100
  delay: Total size now 264.

PROMOTING DUMPS IF NEEDED, total_lev0 0, balanced_size 0...
analysis took 0.000 secs

GENERATING SCHEDULE:
--------
--------
driver: start time 0.194 inparallel 2 bandwidth 10000 diskspace 0 dir
OBSOLETE d
atestamp 19990223 driver: drain-ends tapeq LFFO big-dumpers -1
driver: result time 0.194 from taper: TAPE-ERROR [cannot overwrite
active tape m
-sys3]
dump of driver schedule before start degraded mode:
--------
--------
dump of driver schedule after start degraded mode:
--------
--------
driver: QUITTING time 0.194 telling children to quit
driver: send-cmd time 0.194 to dumper0: QUIT
driver: send-cmd time 0.194 to dumper1: QUIT
driver: FINISHED time 0.195
amdump: end at Tue Feb 23 19:51:25 MET 1999

What is going wrong here?

TIA

--
-----------------------------------------------------------------------

Sun Microsystems - Remote Admin Center
Richard Reitzner-Allee 8                         Voice +49 89 46008.755
85540 Haar - Germany                               Fax +49 89 46008.777