Q: aha247x: target 2 underflow?

Q: aha247x: target 2 underflow?

Post by Joseph Y Ch » Fri, 30 Jun 1995 04:00:00



Something wrong with my SCSI card or SCSI drive.  When I do
    mke2fs -c /dev/sdc2 1176576

I got
    aha274x: target 2 underflow --- wanted (at least 16384), got 7168

My drive:  Seagate ST32430N 2.1G, partitioned as
       900M for DOS, the rest (~1,176M) for linux.

Could you tell me waht's wrong?
Thank in advance.

-- joe
--
  Joseph Y Chen, grad student        | c++d++e++g++
  Department of Civil Engineering &  | --------------------------------------
      Engineering Mechanics          | voice (520)622-6981 (home)
  University of Arizona              |       (520)621-5719 (work)

 
 
 

Q: aha247x: target 2 underflow?

Post by Joseph Y Ch » Fri, 30 Jun 1995 04:00:00



: Something wrong with my SCSI card or SCSI drive.  When I do
:     mke2fs -c /dev/sdc2 1176576

: I got
:     aha274x: target 2 underflow --- wanted (at least 16384), got 7168

: My drive:  Seagate ST32430N 2.1G, partitioned as
:        900M for DOS, the rest (~1,176M) for linux.

: Could you tell me waht's wrong?
: Thank in advance.

I forgot to say my actuall card Adaptec AHA2842A, VESA BUS

-- joe
--
  Joseph Y Chen, grad student        | c++d++e++g++
  Department of Civil Engineering &  | --------------------------------------
      Engineering Mechanics          | voice (520)622-6981 (home)
  University of Arizona              |       (520)621-5719 (work)


 
 
 

1. Danger? aix7xxx.c: Target 0 underflow

Hi, how dangerous is the error message: "Target 0 underflow - wanted
1024, got 368, residual SG count 1." ?  I start to see it more and
more often on a crucial system....

Klaus
--
________________________________________________________________________


     Need a (virtual) vacation? Go check: http://www.bavaria.com
     No wonder nobody comes here--it's too crowded. -Yogi Berra

2. Proxy arp problem

3. aic7xxx: target 0 underflow???

4. extra WRAM and X server

5. kernel: aic7xxx: Target 1 underflow ...

6. Problem in getting xdm to work

7. 2940 Problem: get message "aic7xxx: Target 0 underflow.....???HELP?!

8. Kernel Management Proposal

9. aha2940W aic7xxx: Target 0 underflow expected 4096 got 4095??

10. 'aic7xxx Target 1 underflow' at installation

11. aic7xxx: target 0 underflow - what does it mean ?

12. Problems installing on AHA2940 adaptor, Device hangs, target underflow

13. aic7xxx: Target 0 underflow, Adaptec 2940 HELP