setting up printer BJC-4100 canon

setting up printer BJC-4100 canon

Post by bar.. » Sun, 19 May 2002 19:24:04



i have a rh 7.1 machine with a * install on it.

i have been trying to us printconf to setup printing. all of the docs
say
i should just follow my nose when using printconf and it should be ok.

i get nothing but errors

i am getting the following errors;
 #lpr /etc/hosts
Status Information:

 connecting to 'localhost', attempt 1
 connected to 'localhost'


  error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL'

 error msg: 'printer 'lp', chdir to '/var/spool/lpd/lp' failed
'Permission denied''

 #service lpd start
Starting lpd: Warning - owner/group of '/var/spool/lpd/lp' are 0/7, not
4/7
Warning -   changing ownership '/var/spool/lpd/lp' to 0/7
Warning -   changing ownership '/var/spool/lpd/lp' to 0/7
Warning - owner/group of 'hfA518' are 0/7, not 4/7
Warning -   changing ownership 'hfA518' to 4/7
Warning -   changing ownership 'hfA518' to 4/7
Warning - owner/group of 'dfA518loki.feral.net.au' are 0/7, not 4/7
Warning -   changing ownership 'dfA518loki.feral.net.au' to 4/7
Warning -   changing ownership 'dfA518loki.feral.net.au' to 4/7
Warning - owner/group of 'cfA518loki.feral.net.au' are 0/7, not 4/7
Warning -   changing ownership 'cfA518loki.feral.net.au' to 4/7
Warning -   changing ownership 'cfA518loki.feral.net.au' to 4/7
Warning - owner/group of 'control.lp' are 0/7, not 4/7
Warning -   changing ownership 'control.lp' to 4/7
Warning -   changing ownership 'control.lp' to 4/7
Warning - owner/group of 'status.lp' are 0/7, not 4/7
Warning -   changing ownership 'status.lp' to 4/7
Warning -   changing ownership 'status.lp' to 4/7
Warning - owner/group of 'status' are 0/7, not 4/7
Warning -   changing ownership 'status' to 4/7
Warning -   changing ownership 'status' to 4/7
Warning - owner/group of 'log' are 0/7, not 4/7
Warning -   changing ownership 'log' to 4/7
Warning -   changing ownership 'log' to 4/7
Warning - owner/group of 'acct' are 0/7, not 4/7
Warning -   changing ownership 'acct' to 4/7
Warning -   changing ownership 'acct' to 4/7

 
 
 

1. Printer error in RH5.2 (Canon BJC-4100)

I get the following error when I try to print a postscript file on my
Canon BJC 4100 printer. ( I have selected BJC-600 BJC-4000 as the input
filter, and I have RH5.2)

Unrecoverable error: rangecheck in .putdeviceprops
(1488)op_array(486)0x817b0d4:Execution stack at 0x813ccc8

I have tried printing a test postscript page as well as a file from gv
and get the same result. If the Canon drivers have been updated, could
someone let me know where to pick it from?

thanks
murli

Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

2. locale not supported

3. Canon BJC-4100 printer: no color support in RedHat 4.1

4. Seagate 4G/8G IDE Atapi Tape Drive

5. Linux support for Canon BJC-4000 or BJC-4100?

6. Linux math exception handling

7. Caldera Openlinux 2.2 and Canon BJC-4100

8. dlopen error

9. My Canon BJC-4100 is being a butthead....

10. ISDN 128k w/ BitSurfer & Postscript with Canon BJC-4100

11. Configure a Canon BJC-4100 ?

12. Canon BJC-4100 no longer available in WP8.0

13. Pls. help : driver for Canon BJC-4100