by Both My modem and Sound card Do not work i think this may be becuase
of
PnP but im not sure, almost everything i have tried has failed, i have
included the Windoze settings i gleamed from the device listing, and i
included various listings from linux, such as pnpdump and /proc/pci
/proc/dma - ETC... if you have any answers please post all suggestions
are
Thanks in advance,
Poet
telepath 33.6 fax modem (COM3)
Interrupt request 04
Input/Output range 0110 - 0117
And my sound card comes up with the following
MIDI settings
address 330
IRQ 5
Wave/SB emulation Settings
SB address 220
Wave Address 534
IRQ 5
DMA 1
There is then multiple devices, legecy audio PCI something there are
overall about 6 I/O ranges, and another interupt request of 10 with IO
of
FF00- FF3F and the first five others are like 0530 - 0537 and 0330 -
033F
and 0220 -022F and 0388 - 038B those five have Interup request of 05
and
Direct Memory access or 01. thanks again
and here are the linux outputs
# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 12 65 58 54 67 01 10 72 56
# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 12 65 58 54 67 01 10 72 56)
# Vendor Id USR1001, Serial Number 1700287591, checksum 0x12.
# Version 1.0, Vendor version 0.0
# ANSI string -->TelePath 28.8 fax modem <--
#
# Logical device id USR1001
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be
changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE USR1001/1700287591 (LD 0
# IRQ 3, 4, 5, 7 or 9.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Fixed IO base address 0x0110
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0110))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x0170
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0170))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x0210
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0210))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x0270
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0270))
# Start dependent functions: priority preferred
# Fixed IO base address 0x02f0
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02f0))
# Start dependent functions: priority preferred
# Fixed IO base address 0x0370
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0370))
# End dependent functions
(NAME "USR1001/1700287591[0]{TelePath 28.8 fax
modem }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
*****************/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 82437VX Triton II (rev 2).
Medium devsel. Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=32.
I/O at 0xffa0 [0xffa1].
Bus 0, device 13, function 0:
Multimedia audio controller: Ensoniq AudioPCI (rev 0).
Slow devsel. IRQ 10. Master Capable. Latency=104. Min
Gnt=12.Max
Lat=128.
I/O at 0xff00 [0xff01].
Bus 0, device 14, function 0:
VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 1).
Medium devsel. IRQ 11. Master Capable. Latency=40. Min
Gnt=4.Max
Lat=255.
Non-prefetchable 32 bit memory at 0xf8000000 [0xf8000000].
Bus 0, device 16, function 0:
Ethernet controller: VIA Technologies Unknown device (rev 6).
Vendor id=1106. Device id=3043.
Medium devsel. IRQ 10. Master Capable. Latency=240. Min
Gnt=118.Max Lat=152.
I/O at 0xfc80 [0xfc81].
Non-prefetchable 32 bit memory at 0xffbefc00 [0xffbefc00].
*****************/proc/dma
4: cascade
*****************/proc/interrupts
CPU0
0: 4432075 XT-PIC timer
1: 3025 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 0 XT-PIC eth0
12: 268130 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 505252 XT-PIC ide0
15: 698947 XT-PIC ide1
NMI: 0
****************/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
fc80-fcff : eth0
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
--
++++++++++++++++++++++++++++++++
+My Insanity Defies Reality++++++++
+++++++++++++++++++++++++++++++++++++++
+Over your shoulder there always there+
Sent via Deja.com http://www.deja.com/
Before you buy.