Board index Linux Setup

Problem with WorkStation Setup in RedHat 5.2/Intel

Problem with WorkStation Setup in RedHat 5.2/Intel

Post by Nagib Tharan » Thu, 24 Dec 1998 04:00:00



Hi,

Using WinNT/64MB SDRAM/Pentium MMX 200/Trying to install Linux

I have a 3.2G HD partitioned in to a 2.2 and 1GB partiton.  I deleted the
1GB partition and then proceed with the workstation install.
It created a 20MB partition, a 977MB Partition and a 32MB Swap partition.
After 10 seconds it stopped telling me the device to which it was installing
was full.  I think it is trying to install everything on the 20MB partition.
Is there any way to avert this?

Thanks in advance.

Nagib

 
 
 
Top

Problem with WorkStation Setup in RedHat 5.2/Intel

Post by Warren Mir » Fri, 25 Dec 1998 04:00:00


why not doing a custom install and partion the drive urself...then point to
setup where u want the packages to be installed..

Hope this helps


> Hi,

> Using WinNT/64MB SDRAM/Pentium MMX 200/Trying to install Linux

> I have a 3.2G HD partitioned in to a 2.2 and 1GB partiton.  I deleted the
> 1GB partition and then proceed with the workstation install.
> It created a 20MB partition, a 977MB Partition and a 32MB Swap partition.
> After 10 seconds it stopped telling me the device to which it was installing
> was full.  I think it is trying to install everything on the 20MB partition.
> Is there any way to avert this?

> Thanks in advance.

> Nagib


 
 
 
Top

1. problems printing to intel NetportExpress PRO/100 print server with redhat 5.2 linux

I am running RedHat 5.2 linux on a Intel Pentium III. We have other
machines in our network that can print to our Intel NetportExpress
PRO/100 print server with no problems. However I cannot seem to get
our Linux servers to print to the print server. I have a Cannon
LPB-1260 laser printer attached to the print server which is a HP
compatible printer.

I am able to ping the print server from my linux system just fine.

Here is my /etc/printcap file:
netlsrptr|netlsrptr|netlsrptr-on-parallel-port-1:\
:rm=209.69.52.131:\
:rp=LPT1_TEXT:\
:mx#0:\
:sh:\
:sd=/var/spool/lpd/netlsrptr:

If I issue a /usr/sbin/lpc status command after trying to send a print
job here are the results:
netlsrptr:
        queuing is enabled
        printing is enabled
        1 entry in spool area
        waiting for netlsrptr to become ready (offline ?)

If I issue an lpq -Pnetlsrptr command I get these results:
waiting for netlsrptr to become ready (offline ?)
Rank   Owner      Job  Files                                 Total
Size
1st    root       13   (standard input)                      1191
bytes

The printer has paper and is online. If I print from my workstation or
another server I do not have problems.

Any help with my problem would be greatly appreciated.

Brian

2. modification of command line prompt

3. Problem with RedHat 5.2 and Intel EtherExpress 16

4. Problems Instaling Red Hat 8.0

5. RedHat 5.2 Workstation Install: SIS6326

6. Linux loopback command--WinNT/Win95 /DOS equivalent?

7. help: RedHat 5.2 workstation install /w 1 gig unassigned unused diskspace - insufficent space error!!!@!@!

8. PPP over a network

9. redhat 5.2 NIC setup problem

10. Redhat 5.2 Server vs Workstation: Anyone using the server out there???

11. RedHat 5.2 won't "workstation"

12. Redhat 5.2 Server vs Workstation: Anyone using the server out there???


All times are UTC
Board index